User's Manual

Installation Instructions HTSTS
7
Bolt to Table (Optional)
The HTSTS mount may be bolted to the table for increased
security or stability. Hardware is NOT provided for this
installation.
IMPORTANT ! : Column cover (B) must be attached to
column (A) before being bolted to table.
1. Use column holes as a template to mark holes on table at
desired mounting location.
2. Drill holes at marked locations according to instructions of
hardware being used for installation. (See Figure 4)
3. Use hardware (not included) to secure base plates (D) to
floor. (See Figure 4)
Figure 4
1
2
3
x 3