Installation instructions

ManualsBrandsChief Manualschassis componentsK1C1I2B

INSTALLATION INSTRUCTIONS

Instrucciones de instalación

Installationsanleitung

Instruções de Instalação

Istruzioni di installazione

Installatie-instructies

Instructions d´installation

K1 Single Column with iPad®2/iPad®3 Mount

Spanish Product Description

German Product Description

Portuguese Product Description

Italian Product Description

Dutch Product Description

French Product Description

K1C1I2B

Summary of content (12 pages)

PAGE 1
INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation K1 Single Column with iPad®2/iPad®3 Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description K1C1I2B
PAGE 2
K1C1I2B Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
PAGE 3
Installation Instructions K1C1I2B LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestig
PAGE 4
K1C1I2B Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 1/8" (included) 3/16" (included) PARTS A (1) [arm assembly] B (1) [adapter plate] C (4) M4x12mm D (4) M4x12mm G (4) F (4) M4x12mm M4x20mm E (1) [iPad interface] J (1) 3/16" 4 K (1) 1/8" H (4) M4
PAGE 5
Installation Instructions K1C1I2B Assembly And Installation Low Profile Installation Connecting Arm Assembly to Desk Standard Installation 1. Remove top cap from column. (See Figure 3) 2. Slide mount assembly off of column. (See Figure 3) 1. Loosen clamp screw until enough space is created between clamp and mount to allow for desk mounting.(See Figure 1) NOTE: If space is limited behind desk (i.e. against wall, etc.
PAGE 6
K1C1I2B Installation Instructions 4. iPad2®/iPad3® Installation 1. Remove quick release faceplate from arm assembly (A) by pressing quick release tab and sliding faceplate off mount. (See Figure 5) Use four M4x12 Phillips flat head screws (C) to connect iPad® interface (E) to adapter plate (B). (See Figure 7) 1 (B) 1 quick release tab 2 Figure 5 2. Figure 7 Use four M4x12mm Phillips pan machine screws (D) to connect faceplate to adapter plate.
PAGE 7
Installation Instructions 8. K1C1I2B To release the iPad® from the mount, firmly hold the iPad® while pressing back on the tab to release and remove the iPad®. (See Figure 9) Adjustments Column Height Adjustment 1. Loosen column adjustment knob. (See Figure 11) 2. Adjust height to desired level. (See Figure 11) 3. Tighten column adjustment knob. (See Figure 11) 1 3 2 Figure 9 9. Position iPad® with faceplate attached above mount. (See Figure 10) 10.
PAGE 8
K1C1I2B Installation Instructions Head Tilt Adjustment Portrait Adjustment 1. Adjust head tilt to desired tilt position. (See Figure 13) 2. Adjust head tilt tension screw to change the adjustment tension. (See Figure 13) The iPad® may be adjusted 90 degrees in either direction in order to provide a portrait view of the iPad®. Height Adjustment 1. Adjust height to desired level. (See Figure 13) 2. Open cable management cover on upper arm to expose height-adjustable tension screw.
PAGE 9
Installation Instructions K1C1I2B 9
PAGE 10
K1C1I2B 10 Installation Instructions
PAGE 11
Installation Instructions K1C1I2B 11
PAGE 12
K1C1I2B Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002197 Rev00 2012 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 06/12 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.