INSTALLATION INSTRUCTIONS Istruzioni di installazione Installatie-instructies Instructions d´installation Instrucciones de instalación Installationsanleitung Instruções de Instalação KFA-220/225 KFA-320/325 Carts and Stands Horizontal Array Accessory Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description KFA SERIES
KFA SERIES Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions KFA SERIES KFA-220 DIMENSIONS CLAMP FOR ATTACHING TO PF AND MF SERIES CARTS AND STANDS 13.68 5.68 23.83 IF SAME SIZE DISPLAY IS USED FOR BOTH, MAXIMUM SCREEN WIDTH OF 22.7". 1.96 4.50 KFA-225 DIMENSIONS CLAMP FOR ATTACHING TO PF AND MF SERIES CARTS AND STANDS 17.24 437.8 6.68 30.51 774.8 IF SAME SIZE DISPLAY IS USED FOR BOTH, MAXIMUM SCREEN WIDTH OF 30.0". 1.96 49.8 4.50 114.
KFA SERIES Installation Instructions KFA-320 DIMENSIONS CLAMP FOR ATTACHING TO PF AND MF SERIES CARTS AND STANDS 20.80 528.3 7.93 201.5 37.14 943.3 IF SAME SIZE DISPLAY IS USED FOR ALL THREE, MAXIMUM SCREEN WIDTH OF 18.0". 1.96 49.8 4.50 114.3 KFA-325 DIMENSIONS 53.81 1366.7 CLAMP FOR ATTACHING TO PF AND MF SERIES CARTS AND STANDS 10.87 276.1 48.69 1236.7 IF SAME SIZE DISPLAY IS USED FOR ALL THREE, MAXIMUM HORIZONTAL SCREEN WIDTH OF 25.00" [635.0]. 1.96 49.8 4 4.50 114.
Installation Instructions KFA SERIES LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Beves
KFA SERIES Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 5/32" (included) PARTS (refer to Table 1 for quantities and part descriptions) A B D C E F G H 6 J K L M
Installation Instructions KFA SERIES NOTE: If removing existing head assembly from cart/stand, do so prior to installing KFA Series arrays.
KFA SERIES Installation Instructions Attach Centris Head to Recessed Mount Display (C) x 2 CAUTION: If display uses a screw size other than those included in the kit, DO NOT use the screws provided. Using the wrong screws could result in damage to your monitor. 1. Uninstall end lock using the 5/32" hex key (H). (See Figure 6) 1 2. Remove Centris head from mounting rail.
Installation Instructions KFA SERIES Array Rail 6 (G or D) x 4 End Lock Centris Head 5 4 (E or F) x 4 Centris Head End Lock Retaining Screw Figure 10 Display Figure 8 7. Slide display with Centris bracket onto mounting rail. (See Figure 9) NOTE: Repeat previous steps for each additional display. 8. Install end locks into mounting rail using the 5/32" hex key (H).
KFA SERIES Installation Instructions right until properly positioned. 3. Tighten Centris bracket front adjustment knob.
Installation Instructions KFA SERIES 11
KFA SERIES Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8834-000011 REV 01 2010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 04/10 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.