INSTALLATION INSTRUCTIONS Height-Adjustable Dual Arm with Keyboard Tray Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description KWK-110
KWK-110 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions KWK-110 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestig
KWK-110 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 3/16" (included) 5/32" (included) #2 7/16" 1/8" PARTS Mounting Kit A (1) [KWK-110] C (1) [Wall plate] B (1) [Cable management cover] D (2) 1/4 x 2 1/2" E (2) 1/4" F (1) [Gel wrist pad] G (1) [Mouse holder] H (6) [Hook and loop fastener] J (2) #8-32 x 3/8" K (1) 3/16" 4 L (1) 5/32"
Installation Instructions KWK-110 INSTALLATION WARNING: FAILURE TO PROVIDE ADEQUATE STRUCTURAL STRENGTH FOR THIS MOUNT CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s responsibility to make sure the structure to which this mount is attached can support five times the combined weight of the mount and all equipment attached to it. Reinforce the structure as required before installing the mount. (A) 6 Installation to Wood Studs 1.
KWK-110 Installation Instructions Keyboard and Wrist Pad Installation CABLE MANAGEMENT 1. Remove paper from adhesive backing on one side of hook and loop fasteners (H). 1. 2. Place hook and loop fasteners (H) on bottom of the keyboard (not included) and bottom of wrist pad (F) approximately as shown. (See Figure 4) NOTE: If necessary, cable management bracket attach screws NOTE: Place fasteners only on flat surfaces of the keyboard to ensure that fasteners stick to keyboard surface. 3.
Installation Instructions KWK-110 5. Carefully insert cables into cavity located in lower portion of mount arm. (See Figure 8) 6. Install cable management cover (B) using two #8-32 x 3/8" Phillips flat head screws (J). (See Figure 8) 3 Height adjustment screw Cable path (typical) Height adjustable arm (B) (J) x 2 6 Figure 8 ADJUSTMENTS Figure 10 Swing Arm Pivot/Swing Adjustment 1. 4. Slightly loosen or tighten the adjustment screw(s) as necessary, using the 3/16" hex key (K).
KWK-110 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002343 Rev00 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 04/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
