Manual

Installation Instructions LFAU
11
Stand Use and Maintenance
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located between the LFAU up to (and
including) the display does not exceed 200 lbs (90.7 kg).
WARNING: RISK OF SERIOUS INJURY OR DEATH!
Placing a remote control or toy on the stand may encourage
a child to climb onto the stand causing the stand to tip over
onto the child. DO NOT place remote controls or toys on the
stand!
WARNING: RISK OF SERIOUS INJURY OR DEATH!
Relocating audio and/or video equipment to the stand may
result in the stand collapsing or overturning onto a child. DO
NOT relocate audio and/or video equipment to the stand!
WARNING: STAND CAN TIP OVER RESULTING IN RISK
OF INJURY. Never move the stand when displays are
attached. Never push against the stand.
NOTE: The LFAU stand has no user serviceable parts.
NOTE: The LFAU stand can support screen sizes up to a
maximum of 90" wide.
1. Always place stand on a level surface.
Removing Display from Stand
1. Remove any padlocks from interface uprights if installed.
2. Position latches on interface uprights so that they are in the
“open” position. (See Figure 16)
WARNING: DISPLAYS MAY WEIGHT IN EXCESS OF 40
LBS! Always use two people and proper lifting techniques
when installing or positioning display on stand.
3. Carefully lift display from stand. (See Figure 16)
Figure 16
2
3
2
3
open position