INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation LVM3X1UP LVM2X2U LVM3X2U LVM3X3U LVM2X2UP LVM3X2UP Video Wall Carts Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description LVM Series
LVM Series Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions LVM Series NOTE: The LVM Series video walls can support screen sizes of 42-46". When FCAX08, FCAx14 or FCAx20 are used, the LVM Series video walls can support a screen up to 60". WARNING: Do not use this product outdoors. WARNING: RISK OF SERIOUS INJURY OR DEATH! NOTE: The UL listed leveling feet accessory FCA776 may be Placing a remote control or toy on the cart may encourage a child to climb onto the cart causing the cart to tip over onto the child.
LVM Series Installation Instructions LVM3X2U MAX WEIGHT: 125 LBS PER DISPLAY 750 LBS TOTAL 15.75 400.0 MAX MOUNTING PATTERN HEIGHT 108.00 2743.2 88.27 2242.1 72.00 1828.8 SCREEN CENTER MAX HEIGHT 2.53 64.1 74.54 1893.3 73.50 1866.9 24.00 [609.6] SCREEN CENTER MIN HEIGHT 6.97 176.9 1.50 38.1 3.73 94.7 3.77 95.8 8.47 215.0 38.63 981.1 25.47 646.8 1.49 37.9 36.00 914.4 40.40 1026.2 4.25 108.0 42.44 1077.9 94.06 2389.2 6.97 176.9 LVM3X3U 100 LBS PER DISPLAY 900 LBS TOTAL 15.75 400.
Installation Instructions LVM3X1UP LVM Series MAX WEIGHT: 125 LBS PER DISPLAY 6.98 177.2 LVM2X2UP 90.47 2297.
LVM Series LVM3X2UP 90.62 2301.
Installation Instructions LVM Series LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Beves
LVM Series Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 1/2" (12.
Installation Instructions LVM Series Parts - Portrait Models - LVM3X1UP/LVM2X2UP/LVM3X2UP Hardware bag (letters correspond to letters on bag) A (12/16/24) B (12/16/24) M6x16mm M6x12mm *Quantities are listed as (LVM3X1UP/LVM2X2UP/LVM3X2UP) F (12/16/24) M8x12mm J (1/1/1) [base cross bar] N (2/2/2) [column cap] K (1/2/2) [portrait display rail] M (2/2/2) [cart array column] C (12/16/24) M6x30mm D (12/16/24) E (12/16/24) .750x.344x.
LVM Series Installation Instructions Assembly And Installation Cart Assembly LVM2X2U/LVM3X1UP/LVM2X2UP/LVM3X2UP 1. Lay two cart array columns (M) down on a flat surface. 2. Use eight 5/16-18 x 2 1/2" button head cap screws (EE) and eight 5/16" washers (JJ) to connect cross bar (J) to columns (M). (See Figure 1) 4 (GG) x 4 (CC) (DD) (JJ) x 4* 3 (LL) x 4 (R) or (R2) x 2 (M) x 2 4 (NN) x 4 *washers not used with LVM3X1UP or LVM3X2 models (J) Figure 2 LVM3X2U/LVM3X3U (JJ) x 8 2 1.
Installation Instructions 5. LVM Series Place two extender blocks (U) in position between two extender brackets (W). Be sure to line up holes on blocks and brackets. (See Figure 4) (M) 5 (U) x 2 6 (EE) x 4 interior holes front (W) x 2 exterior holes Figure 4 6. back Figure 5 While holding extender blocks in position, install four 5/1618 x 2 1/2" button head cap screws (EE) through extender brackets (W), extender blocks (U) and into remaining cart array column (M). (See Figure 5) 7.
LVM Series Installation Instructions Column Add-On Installation (LVM3X3U/ LVM2X2UP/LVM3X2UP only) 1. Insert one column add-on (V) to each column (M) making sure holes are lined up on each side. (See Figure 7) 2. Use 5/32" hex key (RR) and six 1/4-20 x 1/2" flat head cap screws (X) to secure each column add-on (V) to each column (M). (See Figure 7) (rear view) 3 2 3 (FF) (NN) (rear view) center of top displays (V) 2 2 (X) x 6 (JJ) x 2 Figure 8 1 3.
Installation Instructions LVM Series (FF) 5 7 8 (NN) 5 (HH) x 2 (K or L) (Q) display 4 height (JJ) x 2 8 Figure 10 6. Use four 5/16-18 x 3/4" button head flange screws (HH) to secure each attached clamp bracket (P) to a quick connect base (Q). (See Figure 11) Figure 12 8. 6 (Q) (HH) x 4 Hang rails (K or L) into screws installed in previous step to quick connect bases (Q).
LVM Series Installation Instructions Add-On Rail Installation (LVM3X2U/LVM3X3U only) 1. Install add-on rail (KK) to right column following instructions in Rails Installation section. 2. Use three #10-24 x 1 1/2" flat head cap screws (Z) to attach each add-on rail (KK) to display rail (L). (See Figure 14) 2 (Z) x 3 CAUTION: Using screws of improper diameter may damage your display! Proper screws will easily thread into display mounting holes. 2.
Installation Instructions (portrait models) LVM Series 5 (A-C or F-H) x 4 (D) x 4 (AA) (E) x 4, if necessary (BB) Figure 16 WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of each display and attached accessories mounted to the LVM mount does not exceed the limit listed below.
LVM Series 6. Installation Instructions Starting from the bottom and working up, hang interface brackets (AA and BB) to display rails (K or L and KK). (See Figure 17) underside view WARNING: Improper display installation to the cart can result in serious personal injury or damage to equipment! Install displays from the bottom to the top to decrease the risk of tipping the mount during installation. Do not mount all of the displays on one side prior to installing the displays evenly in each row.
Installation Instructions LVM Series Adjustments Additional Cable Management Options Height Adjustment 2. 1. Cables may be routed through tops of columns and out through the back cable management hole. (See Figure 23) Use upper knob on back of interface brackets (AA and BB) to adjust the height of each display. (See Figure 21) 2 NOTE: Adjust both brackets in order to maintain a level mount. Plumb Adjustment 2.
LVM Series 5. Installation Instructions For any cable management holes that are not used, snap covers (TT) may be used to cover holes as desired.
Installation Instructions LVM Series 19
LVM Series Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8800-002369 Rev00 2013 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 03/13 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
