INSTALLATION INSTRUCTIONS Instrucciones de instalación Installationsanleitung Instruções de Instalação Istruzioni di installazione Installatie-instructies Instructions d´installation Height Adjustable Video Cart Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description MPAU
MPAU Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively “Milestone”), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions MPAU DIMENSIONS CABLE CORD WRAP HOOKS +/-2 ROLL ADJUSTMENT TILT ADJUSTMENT 47.74 1212.
MPAU Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevesti
Installation Instructions MPAU TOOLS REQUIRED FOR INSTALLATION #2 M5 (included) 3/16” (included) PARTS T (1) [hardware bag] C (1) A (4) [column upper [upright cover] cover] B (2) [interface upright] D (1) [column inner cover] G (1) [back cover] E (1) [interface head assembly] TA (8) M4x16mm TB (6) M4x20mm TC (6) M4x25mm TD (6) M5x16mm TE (6) M5x20mm TF (6) M5x25mm F (1) [column assembly] J (1) [right cart leg] K (2) [cable hook] TI (6) M8x20mm H (1) [left cart leg] L (1) [left transition co
MPAU Installation Instructions Assembly And Installation CAUTION: Attachment holes may be damaged if a power drill is used to insert button head cap screws. Screws should first be inserted and turned BY HAND with the hex key or with a hand-held screwdriver BEFORE using the hex head drill bit and power drill to complete the attachment. Cart Assembly 1. Carefully set column assembly (F) on its left side. (See Figure 1) 2.
Installation Instructions MPAU Display Installation CAUTION: Using screws of improper length may damage your display! Proper screws will have adequate thread engagement without contacting bottom of display mounting holes. WARNING: Exceeding the weight capacity can result in serious personal injury or damage to equipment! It is the installer’s responsibility to make sure the combined weight of all components attached to the MPAU up to (and including) the display does not exceed 125 lbs (56.7 kg).
MPAU Installation Instructions 9. WARNING: Display may be very heavy! Ensure display Move latches on interface uprights to the “closed” position to secure display to head assembly. (See Figure 8) may be safely lifted and maneuvered as required to install on cart. Failure to take adequate precautions can result in serious personal injury or damage to equipment! 7. Position latches on interface uprights so that they are in the “open” position. (See Figure 6) 8.
Installation Instructions MPAU Cable Management NOTE: The following cable management options may vary based on type of display being mounted and user preference. 1. 5. Route cables along FCA clips to be used for cable management. (See Figure 12) 6. Use cable ties (V) to secure cables to FCA clips. (See Figure 12) Use two 1/4-20 x 1/2” Phillips pan machine screws (Q) to attach two cable hooks (K) to bottom of column assembly (F). (See Figure 10) (F) 5 6 (V) (K) x 2 (Q) x 2 1 Figure 12 7.
MPAU Installation Instructions 8. Route cables down column channel, tucking them behind height-adjustment carriage and underneath bracket holding height-adjustment shaft. (See Figure 14) Adjustments 9. Wrap cables around cable hooks as desired. (See Figure 14) 1. Remove cable cover (G) to expose height adjustment knob. 2. Turn height adjustment knob clockwise to raise display. (See Figure 15) 3. Turn height adjustment knob counterclockwise to lower display. (See Figure 15) 10.
Installation Instructions MPAU Pitch Adjustment 5. 6. WARNING: CART CAN TIP OVER RESULTING IN Turn pitch adjustment knob clockwise to tilt display forward. (See Figure 17) INJURY! Do not allow children under 16 to move cart. Only adults should move this cart. Move cart slowly. Apply moving force on narrow dimension. Never apply force at top - always push toward the middle. Push, don’t pull cart. (See Figure 18) Turn pitch adjustment knob counterclockwise to tilt display back.
MPAU Installation Instructions Removing Display from Cart 1. Remove any padlocks from interface uprights if installed. 2. Position latches on interface uprights so that they are in the “open” position. (See Figure 20) WARNING: DISPLAYS MAY WEIGHT IN EXCESS OF 40 LBS! Always use two people and proper lifting techniques when installing or positioning display on cart. 3. Carefully lift display from cart.
Installation Instructions MPAU 13
MPAU 14 Installation Instructions
Installation Instructions MPAU 15
MPAU Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002510 Rev01 2014 Milestone AV Technologies www.chiefmfg.com 01/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.