INSTALLATION INSTRUCTIONS NAM1T NAM1F NAM1A Rack Monitor Bracket and Mounts Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description NAM1F / NAM1A / NAM1T
NAM1F / NAM1A / NAM1T Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions NAM1F / NAM1A / NAM1T DIMENSIONS--continued NAM1T 177.04 7" DIMENSIONS: [MILLIMETERS] INCHES NAM1A 177.
NAM1F / NAM1A / NAM1T Installation Instructions LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme Loosen Fastener Open-Ended Wrench Aflojar elemento de fijación Llave de boca Befestigungsteil lösen Gabelsc
Installation Instructions NAM1F / NAM1A / NAM1T ASSEMBLY OF NAM1 BRACKET (Installation for 1" Extension) The NAM1 Series of products is designed for use in the Chief Raxxess series of racks. These products accommodate the following installation configurations: • • • VESA compliant display/interface (75x75, 100x100, 100x200) FWD110 wall mount FTR wall mount Determine Location 1. Determine location of bracket (B) in the Chief Raxxess rack.
NAM1F / NAM1A / NAM1T Installation Instructions Installation Option A 8. Install all cables. 1. Install Listed interface bracket (not included) to display, if required, following instructions included with interface bracket. 9. Installation Option A is complete. 2. Proceed to Assembly of NAM1 Series to Rack section. 1. 3. Place display face down on protective surface.
Installation Instructions NAM1F / NAM1A / NAM1T 8. Tighten all fasteners. Do not overtighten! 9. Proceed to Assembly of NAM1 Series to Rack section. (G) x 4 10. Install all cables. 11. Installation Option B is complete. Installation Option C 1. Install Listed interface bracket (not included) to display, if required, following instructions included with interface bracket. 2.
NAM1F / NAM1A / NAM1T Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8804-002020 Rev00 2010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 08/10 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.