Manual

Installation Instructions PAC730A/B/C

INSTALLATION

NOTE: The PAC730 may be mounted on the Chief cart or

stand either by being attached mid-column on the cart

or stand column, or to the top of the cart or stand

column.

Mid-Column Attachment

1. Attach pole attachment plate (B) around the cart or stand

column to the storage shelf (A) using four 1/4-20 x 3/8"

button head cap screws (F). (See Figure 1)

2. Proceed to Adding Bumpers section.

Figure 1

Top of Column Attachment

1. Attach upper bracket (C) to storage shelf (A) using four

1/4-20 x 3/4" button head cap screws (H). (See Figure 2)

NOTE: The upper bracket (C) may be attached in two different

ways using the two hole patterns on the storage shelf

bottom. (See Figure 2)

Figure 2

2. Remove display from faceplate following instructions in the

cart or stand installation instructions.

(F) x 4

(B)

(A)

Cart/Stand

Column

(H) x 4

Hole

Pattern