INSTALLATION INSTRUCTIONS Yamaha Speaker Adapter Accessory PAC-Y3
PAC-Y3 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions PAC-Y3 LEGEND Tighten Fastener Phillips Screwdriver Apretar elemento de fijación Destornillador Phillips Befestigungsteil festziehen Kreuzschlitzschraubendreher Apertar fixador Chave de fendas Phillips Serrare il fissaggio Cacciavite a stella Bevestiging vastdraaien Kruiskopschroevendraaier Serrez les fixations Tournevis à pointe cruciforme Loosen Fastener Open-Ended Wrench Aflojar elemento de fijación Llave de boca Befestigungsteil lösen Gabelschlüssel Desape
PAC-Y3 Installation Instructions MOUNT ASSEMBLY Center Speaker Mounting Bracket Assembly 1. Assemble left bottom speaker bracket (E) to center speaker bracket (F) using two 1/4-20 x 1/2" button head cap screws (L). (See Figure 1) 2. Assemble right bottom speaker bracket (D) to center speaker bracket (F) using two 1/4-20 x 1/2" button head cap screws (L). (See Figure 1) (B) (C) (E) (L) x 4 (D) (E) (D) Figure 2 Speaker Adapter Assembly 1.
Installation Instructions PAC-Y3 (A) (Q) x 4 (G) x 2 (G - 2 places) (Assembled to speaker) (P) x 4 (YSP-4000 shown) (YSP-4000 speaker shown) Figure 6 Figure 4 5. Partially install two 1/4-20 x 1/2" button head cap screws (L) into top back of speaker mount adapter (A). (See Figure 7) 6. Slide installed screws (L) on back of speaker mount adapter (A) through teardrop mounting holes in center speaker bracket (F). Lower bracket until screws are seated in lower area of teardrop mounting holes.
PAC-Y3 Installation Instructions Latching Flag Assembly to Speaker Adapter 1. Assemble one Phillips machine screw (RB) through latching flag (RA) and spacer (RC). (See Figure 8) 2. Secure latching flag to left speaker mounting support (B) using one Nylock nut (RD). (See Figure 8) (H) x 4 (Q) x 4 (B) (C) (RD) (B) (RA) (M) x 4 (RC) (RB) Figure 9 MOUNT INSTALLATION WARNING: IMPROPER INSTALLATION CAN LEAD TO Figure 8 Assemble Mounting Buttons to Speaker Brackets 1.
Installation Instructions 1. PAC-Y3 Install PACY3 onto mount following the instructions provided with the mount. (See Figure 10) 5. Slide mounting buttons on display into teardrop holes in right and left speaker mounting supports (B and C), and lower display until recessed area of mounting buttons is seated in lower area of teadrop mounting holes. (See Figure 12) 6. Close latching flag to secure display to speaker adapter accessory.
PAC-Y3 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies Asia Pacific 8807-000074 Rev01 2010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 09/10 A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.
