Installation instructions

CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: [phone], Email: [e-mail]
8804-000352 Rev. A
12/05/07
INSTALLATION INSTRUCTIONS
PSB-2029
PLASMA DISPLAY MOUNTING BRACKET
Prior to assembly, unpack carton completely and verify contents.
If you are missing any of the following components, please contact Customer Service at 1-800/582-6480
(2) Plasma Bracket (4) Mounting Buttons – Tapped
(4) 10-24 x ½ Button Head Cap Screw (1) 1/8 Allen Key
(4) M5 x 20mm Phillips Head Cap Screw (4) .875 OD x .33 ID x .375 Nylon Spacer
(4) M6 x 30mm Button head cap screw (4) M6 x 20mm Button Head Cap Screw
(1) M4 Allen Key
BEFORE PROCEEDING, READ INSTALLATION INSTRUCTIONS COMPLETELY
PLASMA DISPLAYS ARE EXTREMELY FRAGILE.
1. Using a 10-24 button head cap screw inserted from back side of bracket, secure mounting button,
with chamfered hole of mounting button (larger surface) facing bracket, to bracket (four places) (see
Figure 2 & Figure 3).
2. Place Nylon spacers over mounting holes on back of screen.
3. Attach mounting brackets to the display using the length of M6 screw that works best for your screen.
(see Figure 4 & Figure 5).
4. With the aid of another person, lift your display up to the Chief Mount, aligning buttons of mounting
brackets with slots in the Chief Mount.
5. Lower safety catch on the Chief Mount to secure your display, making sure latch is completely
engaged.
CAUTION!
Figure 4 Figure 5
Figure 1 Figure 2 Figure 3