INSTALLATION INSTRUCTIONS PLASMA SWIVEL STAND Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description PSS2000
PSS2000 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions PSS2000 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestig
PSS2000 Installation Instructions TOOLS REQUIRED FOR INSTALLATION #2 1/2" (12.
Installation Instructions PSS2000 INSTALLATION NOTE: For free-standing applications only, install five rubber 2 bumpers (B) onto bottom of stand (A). (See Figure 1) 1 x4 1 (B) x 5 (A) x4 3 Figure 2 Figure 1 Stand Assembly Display Height Greater Than 30 Inches 1. Remove slide from base by removing four button head cap screws and four flat washers. (See Figure 3) 2. Remove faceplate from slide by removing two flat washers and two lock nuts.
PSS2000 Installation Instructions 3. Install faceplate into upper mounting holes of slide using two flat washers and two lock nuts removed in Step 2. 3. Drill four 1/4" diameter holes through mounting surface at marks. 4. Install slide onto base using four button head cap screws and four flat washers removed in Step 1. 4. Secure mount to mounting surface using four 1/4-20 cap screws with a length equal to the thickness of the mounting surface A plus 3/4".
Installation Instructions PSS2000 Stand Adjustment Adjusting Display Roll Adjusting Display Height 1. Loosen upper and lower roll adjustment nuts.(See Figure 8) 2. Level display. 3. TIghten roll adjustment nuts. CAUTION: DO NOT ALLOW DISPLAY TO DROP TO BOTTOM OF STAND. Displays are fragile and may be damaged. 1. Hold display in place and loosen the four height adjustment screws. (See Figure 2) 2. Position display to the desired height. 3. Tighten the four height adjustment screws.
PSS2000 Installation Instructions USA/International Europe Chief Manufacturing, a division of Milestone AV Technologies 8800-000070 ©2008 Milestone AV Technologies www.chiefmfg.com 10/08 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Room 24F, Block D, Lily YinDu International Building LuoGang, BuJi Town, Shenzhen, CHINA.