INSTALLATION INSTRUCTIONS Instructions d´installation Istruzioni di installazione Installationsanleitung RPM A-C Instrucciones de instalación Installatie-instructies Instruções de Instalação RPM RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPM and RPM A-C
RPA Elite Series Projector Mount Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions WARNUNG: Wenn das zulässige Gewicht überschritten wird, kann dies zu schweren Körperverletzungen oder Schäden an den Geräten führen! Der Monteur ist dafür verantwortlich, dass das kombinierte Gewicht aller Komponenten, die am Modell RPM befestigt sind, nicht mehr als 22.68 kg beträgt. ADVERTÊNCIAS e AVISOS IMPORTANTES! ADVERTÊNCIA: Os alertas de ADVERTÊNCIA avisam-no para a possibilidade de ocorrência de graves lesões ou morte no caso de incumprimento das instruções.
RPA Elite Series Projector Mount Installation Instructions WAARSCHUWING: Overschrijding van het draagvermogen kan de oorzaak zijn van ernstig persoonlijk letsel en beschadiging van de apparatuur! Degene die het product installeert is ervoor verantwoordelijk dat het totale gewicht van alle componenten die aan de RPM worden bevestigd een gewicht van 22.68 kg niet overschrijdt.
Installation Instructions RPA Elite Series Projector Mount LEGEND Tighten Fastener Pencil Mark Serrez les fixations Marquage au crayon Serrare il fissaggio Segno a matita Befestigungsteil festziehen Stiftmarkierung Apretar elemento de fijación Marcar con lápiz Bevestiging vastdraaien Potloodmerkteken Apertar fixador Marcar com lápis Loosen Fastener Drill Hole Desserrez les fixations Percez un trou Allentare il fissaggio Praticare un foro Befestigungsteil lösen Bohrloch Aflojar elemen
RPA Elite Series Projector Mount Installation Instructions Hammer Target of Projector Martillo Punto de enfoque del proyector Hammer Ziel des Projektors Martelo Mira do projector Martello Punto di proiezione Hamer Doel van de projector Marteau Cible du projecteur 1/4" A (1) A (1) or B (1) Example Only (Interface bracket varies dependent on projector model) 6 7/32" (6mm) dia.
Installation Instructions RPA Elite Series Projector Mount 1 RPM INSTALLATION Threaded Pipe Installation 1. Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 2 2. 4 Install ceiling plate and extension accessories following installation instruction provided by manufacturer.
RPA Elite Series Projector Mount Installation Instructions INSTALLATION Wood Stud Installation 1a 1. Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 1 WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. 2.
Installation Instructions RPA Elite Series Projector Mount Concrete Installation 1b 1. Determine mounting location. WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. 1 2. Using the RPM as a guide, mark four mounting hole locations on ceiling using a pencil or similar tool. 3. Drill four 3/8" (10mm) dia.
RPA Elite Series Projector Mount 1c 1 Installation Instructions Threaded Rod Installation 2 The RPM can be secured to unistrut, angle or channel assembly overhead structural members (trusses or Ibeams) using four 1/4” diameter threaded rods. WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. 4 1. Carefully determine required mount position.
Installation Instructions RPA Elite Series Projector Mount Example Only (Interface bracket varies dependent on projector model) 2a WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. DO NOT substitute hardware. Use only the hardware provided by the manufacturer. 1 1. Secure interface bracket to mount using installation instructions and hardware provided with interface bracket.
RPA Elite Series Projector Mount Installation Instructions Example Only (Interface bracket varies dependent on projector model) 2c Securing Projector with Interface Bracket to Model RPM Mount. WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make certain mounting slots in mount base slide under thumb screws and that screws are seated in the back of slots. 1. Turn thumb nuts until tight to secure projector to mount.
Installation Instructions RPA Elite Series Projector Mount 3 Example Only (Interface bracket varies dependent on projector model) ADJUSTMENTS YAW Adjustment 1. Loosen YAW adjustment locking screw using a #2 Phillips screwdriver. 2. Turn YAW micro-adjustment screw right or left using a #2 Phillips screwdriver until image is properly aligned on target. 3. Tighten YAW adjustment locking screw using a #2 Phillips screwdriver. 2 1 3 3a Pitch Adjustment 1 1.
RPA Elite Series Projector Mount Installation Instructions 3b Roll Adjustment 1 1. Loosen ROLL adjustment locking screw using a #2 Phillips screwdriver. 3 2. Turn ROLL micro-adjustment screw right or left using a #2 Phillips screwdriver until image is properly aligned on target. 3. Tighten ROLL adjustment locking screw using a #2 Phillips screwdriver.
Installation Instructions RPA Elite Series Projector Mount 15
RPA Elite Series Projector Mount Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8832-000157 Rev D 2009 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 08/09 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.
