INSTALLATION INSTRUCTIONS Locking Projector Mount RPAA1, B1, C1
RPAA1, B1, C1 Installation Instructions DISCLAIMER Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions RPAA1, B1, C1 DIMENSIONS 27° YAW ADJUST 12.31 312.7 6.11 155.1 1.50" DIA NPT 4° ROLL ADJUST 25° PITCH ADJUST 3.73 94.8 4.02 102.
RPAA1, B1, C1 Installation Instructions LEGEND 4 Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro
Installation Instructions RPAA1, B1, C1 TOOLS REQUIRED FOR INSTALLATION 3/32" (included) 5/32" (included) PARTS Q (1) [RPAX1] R (4) [security box leg] S (1) 5/32" A (4) D (4) #10-24 x 1/4" M5 x 12mm B (4) M3 x 10mm C (4) M4 x 10mm E (4) M6 x 12mm F (4) 1/4-20 x 1/2" T (8) [spacer] G (4) M2.
RPAA1, B1, C1 Installation Instructions PREPARATION Locate Mounting Site WARNING: IMPROPER INSTALLATION MAY LEAD TO PROJECTOR MOUNT FALLING CAUSING SEVERE PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installers responsibility to make certain the structure to which the projector mount is being mounted is capable of supporting five times the weight of the projector mount and all attached equipment. Reinforce the structure as required before installing the projector mount. 1.
Installation Instructions 6. RPAA1, B1, C1 Turn RPAX1 sleeve clockwise or counterclockwise until the front of the RPAX1 is facing target. (See Figure 4) Attaching Projector Security Legs CAUTION: Using screws of improper length may damage set screw 7 your projector! Proper screws will have adequate thread engagement without contacting the bottom of projector mounting holes. 6 1.
RPAA1, B1, C1 Installation Instructions Attaching Projector to Security Mount Drawer 1. Align projector and security mount drawer so that the projector is oriented correctly. 2. Remove the paper backing from the adhesive washers (V) and attach projector to drawer using adhesive washers (V) and thumb nuts (P) over the security legs (R).
Installation Instructions RPAA1, B1, C1 Yaw 1. Loosen yaw adjustment screw. (See Figure 12) 2. Adjust mount to desired yaw. (See Figure 12) 3. Tighten yaw adjustment screw.
RPAA1, B1, C1 10 Installation Instructions
Installation Instructions RPAA1, B1, C1 11
RPAA1, B1, C1 Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002525 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 03/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
