INSTALLATION INSTRUCTIONS RSA Projector Mounts RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RPA Elite Series Projector Mount RSA
RSA Projector Mounts Installation Instructions DISCLAIMER Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions RSA Projector Mounts LEGEND Tighten Fastener Pencil Mark Serrez les fixations Marquage au crayon Serrare il fissaggio Segno a matita Befestigungsteil festziehen Stiftmarkierung Apretar elemento de fijación Marcar con lápiz Bevestiging vastdraaien Potloodmerkteken Apertar fixador Marcar com lápis Loosen Fastener Drill Hole Desserrez les fixations Percez un trou Allentare il fissaggio Praticare un foro Befestigungsteil lösen Bohrloch Aflojar elemento de fijaci
RSA Projector Mounts Installation Instructions Hammer Target of Projector Martillo Punto de enfoque del proyector Hammer Ziel des Projektors Martelo Mira do projector Martello Punto di proiezione Hamer Doel van de projector Marteau Cible du projecteur TOOLS REQUIRED FOR INSTALLATION 7/16" #2 7/32" (6mm) dia.
Installation Instructions RSA Projector Mounts 1 (not included) RSA INSTALLATION Threaded Pipe Installation 1. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 2 (not included) 2. 4 Carefully determine required mounting location. 3 Using a pipe wrench, install 1-1/2" NPT or NPSM following ANSI/ASME B1.20.1 (Schedule 40, 0.
RSA Projector Mounts Installation Instructions INSTALLATION Wood Stud Installation 1a 1. Carefully determine required mounting location. IMPORTANT ! : This will require knowing the lens to screen distance. See projector specifications for details on determining this distance. 1 WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted.
Installation Instructions RSA Projector Mounts Solid Concrete Installation 1b 1. Determine mounting location. WARNING: The RSA is designed to be mounted to a concrete ceiling with a minimum thickness of 8" and a maximum drywall covering of 5/8". 1 WARNING: IMPROPER INSTALLATION CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Structural members MUST be capable of supporting five times the combined weight of all equipment being mounted. X4 2 2.
RSA Projector Mounts 1c Installation Instructions 1 Threaded Rod Installation 2 The RSA must be suspended from four 1/4" diameter (minimum) Grade 2 or better threaded rods (not included) which are secured to unistrut, angle or channel assembly overhead structural members (trusses or I-beams) by Grade 2 or better 1/4" channel nuts (not included).
Installation Instructions RSA Projector Mounts Example Only (Interface bracket varies dependent on projector model) 2a WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. DO NOT substitute hardware. Use only the hardware provided by the manufacturer. 1 1. Secure interface bracket to mount using installation instructions and hardware provided with interface bracket.
RSA Projector Mounts Installation Instructions Example Only (Interface bracket varies dependent on projector model) 2c Securing Projector with Interface Bracket to Model RSA Mount. WARNING: IMPROPER INSTALLATION CAN LEAD TO PROJECTOR FALLING RESULTING IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT. Make certain mounting slots in mount base slide under thumb screws and that screws are seated in the back of slots. 1. 1 10 X4 Turn thumb nuts until tight to secure projector to mount.
Installation Instructions RSA Projector Mounts 3 Example Only (Interface bracket varies dependent on projector model) ADJUSTMENTS YAW Adjustment 1. Loosen yaw adjustment screw using a 5/32" hex key. NOTE: Yaw is only adjustable when attached to a threaded pipe. WARNING: Do not turn the projector to the end of the pipe threads.
RSA Projector Mounts Installation Instructions 3b 1 Roll Adjustment 1. Loosen roll adjustment locking screw on each side of the RSA projector mount using a #2 Phillips screwdriver. 2. Adjust projector to desired roll position. 3. Tighten roll adjustment locking screw on each side of the RSA projector mount using a #2 Phillips screwdriver.
Installation Instructions RSA Projector Mounts 13
RSA Projector Mounts 14 Installation Instructions
Installation Instructions RSA Projector Mounts 15
RSA Projector Mounts Installation Instructions USA/International Europe Chief, a products division of Milestone AV Technologies 8800-002643 Rev00 2014 Milestone AV Technologies www.chiefmfg.com 09/14 Asia Pacific A P F A P F A 6436 City West Parkway, Eden Prairie, MN 55344 800.582.6480 / 952.225.6000 877.894.6918 / 952.894.6918 Franklinstraat 14, 6003 DK Weert, Netherlands +31 (0) 495 580 852 +31 (0) 495 580 845 Office No.
