Specifications

Installation Instructions RSA Projector Mounts
11
Pitch Adjustment
1. Loosen pitch adjustment locking screw on each end
of the RSA projector mount using a #2 Phillips
screwdriver.
2. Adjust projector angle to desired pitch.
3. Tighten pitch adjustment locking screw on each end
of the RSA projector mount using a #2 Phillips
screwdriver.
ADJUSTMENTS
YAW Adjustment
1. Loosen yaw adjustment screw using a 5/32" hex
key.
NOTE: Yaw is only adjustable when attached to a
threaded pipe.
WARNING: Do not turn the projector to the end of
the pipe threads. The projector, interface plate and
projector will fall from the pipe if it is unthreaded too
far! A minimum of four threads must be engaged in
order to ensure a secure connection!
2. Adjust projector by turning the projector on the pipe
to the desired yaw position.
3. Tighten yaw adjustment locking screw using a 5/32"
hex key.
3a
3
Example Only
(Interface bracket
varies dependent
on projector model)
Example Only
(Interface bracket
varies dependent
on projector model)
1
3
2
1
3
2