INSTALLATION INSTRUCTIONS Large Flat Panel Static Mount Spanish Product Description German Product Description Portuguese Product Description Italian Product Description Dutch Product Description French Product Description PST16
PST16 Installation Instructions DISCLAIMER WARNING: Failure to read, thoroughly understand, and Milestone AV Technologies and its affiliated corporations and subsidiaries (collectively "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product.
Installation Instructions PST16 LEGEND Tighten Fastener Pencil Mark Apretar elemento de fijación Marcar con lápiz Befestigungsteil festziehen Stiftmarkierung Apertar fixador Marcar com lápis Serrare il fissaggio Segno a matita Bevestiging vastdraaien Potloodmerkteken Serrez les fixations Marquage au crayon Loosen Fastener Drill Hole Aflojar elemento de fijación Perforar Befestigungsteil lösen Bohrloch Desapertar fixador Fazer furo Allentare il fissaggio Praticare un foro Bevestigin
PST16 Installation Instructions TOOLS REQUIRED FOR INSTALLATION 7/32" 1/2" 3/8" PARTS A (1) [PST16] B (2) [Flag extender] C (2) 10-24 x 1/2" D (2) 10-24 F (4) 5/16" E (4) 5/16 x 2-1/2" 4
Installation Instructions PST16 ASSEMBLY AND INSTALLATION 2. Using a stud finder, locate and mark the two studs to which the PST16 will be installed. NOTE: The PST16 may be mounted to a wood 2" x 4" stud 3. Use a nail as a temporary mount and hang the PST16 on the wall using the triangular hole in the center of the PST16. (See Figure 2) 4. Level the PST16 and mark the four mounting holes. (See Figure 2) 5. Remove the PST16 from the wall. wall, 16" on center.
PST16 Installation Instructions 6 x4 [7/32" x 2-1/2"] OPEN 2 (F) x 4 Latching flag Figure 4 7 (E) x 4 3. Align mounting buttons on display with teardrop mounting holes in mount. (See Figure 5) 4. Move display forward until recessed area of mounting buttons is positioned over lower area of teardrop mounting holes. (See Figure 5) 5. Lower display until recessed area of mounting buttons is seated in lower area of teardrop mounting holes.
Installation Instructions PST16 CLOSED 6 Latching flag Figure 6 7. OPTIONAL: Lock the latching flags with a padlock or bolt, if required. (See Figure 7) 7 Place lock or bolt here to lock latching flag Figure 7 8. Route wires and cables to display.
PST16 Installation Instructions USA/International Europe Chief Manufacturing, a products division of Milestone AV Technologies 8805-002006 Rev02 2010 Milestone AV Technologies, a Duchossois Group Company www.chiefmfg.com 08/10 Asia Pacific A P F A P F A 8401 Eagle Creek Parkway, Savage, MN 55378 800.582.6480 / 952.894.6280 877.894.6918 / 952.894.6918 Fellenoord 130 5611 ZB EINDHOVEN, The Netherlands +31 (0)40 2668620 +31 (0)40 2668615 Office No.
