Installation instructions

Installation Instructions VCM
5
Roll (Horizontal Tilt) (See Figure 3)
4. Loosen three bolts on each end of the VCM mount.
5. Turn adjustment bolts (one at each end of VCM mount top)
as required.
• Turn CLOCKWISE to raise
• Turn COUNTERCLOCKWISE to lower
6. Securely tighten three bolts on each end of VCM mount.
Figure 3
Pitch (Vertical Elevation) (See Figure 4)
7. Loosen two outside bolts on each end of the VCM mount.
8. Tilt projector to desired direction.
9. Securely tighten two outside bolts on each end of VCM
mount.
Figure 4
x 3
4
6
x 3
4
6
5
x 2
RAISE
LOWER
x 2
7
9
8
x 2
7
9