Manual

Installation Instructions YF1F12-20-28

INTRODUCTION

The F1 Series racks may be configured with optional

accessories (not included) such as levelers, fan panels, etc. All

accessory installation instructions accompany the accessories.

NOTE: The bottom cover panel may be removed for wire entry

or may be replaced with a filtered fan panel. Follow

instructions included with the fan panel. (See Figure 1)

NOTE: The panels on the back door may be replaced with fan

panels. Follow instructions included with the fan panel.

(See Figure 2)

Figure 1

Figure 2

INSTALLING CASTERS

1. Attach one caster (B) to each lower corner of the F1 rack

using one F1 caster spacer (C) for each caster. (See

Figure 3)

Figure 3

2. Lift rack to upright vertical position after casters are

installed.

3. Lock casters.

May be removed

for wire access or

replaced with a fan panel

(Door removed for clarity)

(Rear view)

May be replaced

with fan panels.

(B) x 1