Datasheet

SNT-3141 SATA Back Plane

User’s Manual

Features of product ---

 Aluminum Frame, Aluminum cover

 Interface: Support SATA-I, SATA-II

 High performance transfer rate up to 150MB/s, 300MB/s

 Plug & play, hot swappable

 Point to point, free from master/slave setting

 SATA 15Pin & Molex 4Pin Power connectors

 LED for PSU, HDD access, Fan sensor & Buzzer

 Power Control Switch

 Reset Switch for buzzer alarm

 8cm FAN X1

 Magic Handle—Auto In/Out

 Color for choice: black

 Dimension: 202(L) X 146(W) X 126(H) mm

 Patent products with advanced structure design

 Precisely connection on connector (see picture A)

---Caddy Drive Drawer Install---

Use TM#6*4 long screws to mount the drive in the drawer. (see picture C)

---Front Panel--- (see picture D, E)

PAGE 1
SNT-3141 SATA Back Plane User’s Manual Features of product --Aluminum Frame, Aluminum cover Interface: Support SATA-I, SATA-II High performance transfer rate up to 150MB/s, 300MB/s Plug & play, hot swappable Point to point, free from master/slave setting SATA 15Pin & Molex 4Pin Power connectors LED for PSU, HDD access, Fan sensor & Buzzer Power Control Switch Reset Switch for buzzer alarm 8cm FAN X1 Magic Handle—Auto In/Out Color for choice: black Dimension: 202(L) X 146(W) X 126(H) mm Patent products with
PAGE 2
D.1--- Reset Switch for buzzer alarm and Overheating LED When overheating occurs the buzzer alarms (default setting: 60°C and the temperature LED turns red meanwhile buzzer is alarming and LED is blinking). press the Reset Switch to stop the alarm, and LED goes off. D.2--- D.5 (HD1〜HD4, Power SW and LED: Power on, LED indicates Green. Orange color blinking for HDD access) D.6--- Fan sensor LED: LED is indicating Green when it is working. When fan fail, LED turns Red. D.