TM SINCE 1954 Foundations Worldwide, Inc. 5216 Portside Dr., Medina, OH 44256 USA • PH: 1 330.722.5033 • FAX: 1 330.722.5037 www.childcraftbaby.com Sheldon™ 4-in-1 Convertible Crib Model Covered: F33401 KEEP INSTRUCTIONS FOR FUTURE USE. THIS IS THE ASSEMBLY INSTRUCTIONS FOR CRIBS SOLD IN THE UNITED STATES FOR CUSTOMER SERVICE CALL 1-877-716-2757 (outside of U.S. 330-722-5033). DO NOT CALL RETAILER OR RESELLER FOR SERVICE AS THEY ARE NOT AUTHORIZED TO RESOLVE ANY SERVICE ISSUES.
PARTS LIST BASIC CRIB Part Description A. Long Headboard Assembly B. Back Post Left C. Back Post Right D. Long Foot Assembly E. Front Post Left F. Front Post Right G. Short Foot Assembly H. Short Head Assembly I. Stretcher J. Spring L. Allen Head Bolt 6mm x 80mm M. Allen Head Bolt 6mm x 60mm N. Allen Head Bolt 6mm x 45mm O. Allen Head Bolt 6mm x 30mm P. Allen Head Bolt 6mm x 14mm Q. Joint Connector Nut 6mm R. Connector Nut 6mm S. Dowel Pin 8mm T.
STEP 2 STEP 4 M F A O R L H P R Q E R M I G O Q P R Q L AB20168_G6 AB20168_G8 STEP 5 STEP 3 S N D L F S D N E Q L AB20168_G9 AB20168_G7 4 5
Toddler Bed Step 1 STEP 6 P J D 1 2 P 3 Lx4 AB20168_GTB1 Toddler Bed Step 2 O O K K O AB20168_G10 Finishing Touches Place a purchased full sized mattress on the spring. After completing the crib assembly, and after making yourself aware of WARNINGS, CAUTIONS, CLEANING,STORAGE,USE and MAINTENANCE of crib on pages 10 and 11, store the assembly directions in the pouch which was pre-attached to the spring. For future referral to assembly directions you will only need to remove them from the pouch.
Guard Rail Option Step 2 WARNINGS WARNING(For Toddler Bed) O WARNING WARNING :INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can entrap head and neck of a small child. NEVER use bed with children younger than 15 months. ALWAYS follow assembly instructions. K O R K L WARNING :STRANGULATION HAZARD: NEVER place bed near windows WARNING O where cords from blinds or drapes may strangle a child. NEVER suspend strings over bed.
CAUTION • ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING 6 IN. IF YOUR CRIB IS DESIGNED TO CONVERT TO A TODDLER BED, THE MATTRESS MUST BE AT LEAST 4 IN. (100 MM ) THICK. • UPON COMPLETION OF ASSEMBLY BE SURE ALL SCREWS, BOLTS AND FASTENING DEVICES HAVE BEEN TIGHTENED SECURELY. A FREQUENT CHECK SHOULD BE MADE OF ALL SCREWS, BOLTS AND FASTENING DEVICES AND TIGHTEN IF NEEDED.
