Owner's manual

1414

EnglishEnglish

English

BIOSTAR Motherboard

1 3

(8) Wake On LAN Header: JWOL1 (optional)

This connector allows you to connect to a LAN card with Wake On LAN

function. You can wake up the computer by remote control through a local area

network.

(9) Front USB Header: JUSB1/ (JUSB2: optional)

The motherboard provides one/(two) USB 2.0 Pin Header. USB 2.0 technology

increases Data transfer rate up to a maximum throughput of 480 Mbps, which

is 40 times faster than USB 1.1, and is ideal for connecting high-speed USB

interface peripherals such as USB HDD, digital cameras, MP3 players, printers,

modems, etc.

Pin Assignment Pin Assignment

1 +5V(fused) 2 +5V(fused)

3 USBP-0/(-6) 4 USBP-1/(-7)

5 USBP+0/(+6) 6 USBP+1/(+7)

7 Ground 8 Ground

9 KEY 10 NC

(10) Power Source Selection for USB: JUSBV1/JUSBV2/JUSBV3v (optional)

JUSBV1/JUSBV2 Assignment Description

JUSBV3

Pin 1-2 close +5V JUSBV1: 5V for J1394_USB1

JUSBV2: 5V for JUSBLAN1

JUSBV3: 5V for JUSB1 port.

Pin 2-3 close +5V Standby Voltage 5V standby to power on.

Note: In order to power-on USB devices function, "JUSBV1/JUSBV2/

JUSBV3" jumper cap should be placed on pin 2-3 respectively.

(11) Case Open Connector: JCI1 (optional)

Pin Assignment

1 Ground

2 Case Open Signal

JWOL1

Pin Assignment

1 +5V_SB

2 Ground

3 Wake up