User Manual
Features & Components
Configuring the Infrared Settings for FIR 2 - 11
2
Configuring the Infrared Settings for FIR
To configure your computer for Fast Infrared (FIR) communication follow
these steps:
1. Click Start, point to Settings an d click Control Panel (or just click Start >
Control Panel).
2. Double-click Wireless Link (Printers and Other Hard ware Category) icon.
3. Click Hardware (tab), and click the Properties button, then click the
Advanced (ta b) .
4. Select “Infrared Transceiver A” and change the Value to “HP HSDL-
2300/3600”.
5. Click OK > OK.
6. Restart the computer if prompted to do so.
For further information, please refer to the manual of the device you wish to
connect.
Infrared
Communication
The infrared transceiv-
er operates on a “Line
of Sight”.
Make sure nothing is
blocking the “Line of
Sight” between your
system’s transceiver
and the destination’s
transceiver.