Instruction Manual

NVIDIA Video Driver Controls
C - 6 Attaching Other Displays
C
Configuring an External Display using the NVIDIA Control Panel
Alternatively you can use the NVIDIA control panel to configure any attached dis-
plays.
1. Attach your external display to the external monitor port/DVI-Out Port (or TV to the
S-Video-Out jack),
and turn it on.
2. Go to NVIDIA Control Panel (see “NVIDIA Control Panel” on page C - 2 ).
3. Double-click Display, and then click Set up multiple displays.
4. Click to select the nView display mode you wish to use (see page C - 7 ).
5. Select the display(s) you want to use (if your display is not shown click “
My Display
is not shown in the list...
”), and choose which display is to be the primary display.
6. Click
Apply > Yes to save the changes.

Function Key
Combination
You can use the Fn + F7
key combination to tog-
gle through some dis-
play options:
• Notebook Only
• External Display Only
• Notebook + External
Display
Make sure you give the
displays enough time to
refresh.
Figure C - 5
Set Up Multiple
Displays