User guide

Concise User’s Guide
Intel Turbo Memory Module - 35
English
Intel Turbo Memory Module
If you have included an Intel Turbo Memory (Robson)
module
in your purchase option, then you will need to
install the driver as per the instructions below (do not
install this driver in Windows XP).
Intel Turbo Memory Technology (also known as Rob-
son flash memory) is an Intel technology that reduces
the time it takes for a computer to boot up, to load appli-
cations, and to write data to the hard drive. Intel Turbo
Memory Technology is supported in Windows Vista only
(it also supports Windows Vista features such as Ready-
Boost, ReadyDrive, and Superfetch).
Intel Turbo Memory & Matrix Storage
Setup and Driver Installation
1. Start-up the computer and press F2 to enter the BIOS.
2. Go to the Advanced menu, select "Installed O/S" and
make sure "Vista" is the selected option.
3. Go to the "SATA Mode Selection" item and make sure
"AHCI" is selected.
4. Select "Exit Saving Changes" from the Exit menu (or
press F10) and press Enter to exit the BIOS and reboot
the computer.
5. Install the Windows Vista operating system.
6. Insert the Device Drivers & Utilities + User’s Manual
disc into the CD/DVD drive (and install the drivers in the
order indicated in Table 5 on page 23).
7. Click Option Drivers (button).
8. Click 5.Install TurboMemory Driver > Yes.
9. Click Next > Yes > Next > Next.
10. Click Finish to restart the computer.
• Windows Ready-
Boost - uses flash
memory as a hard-
drive caching solution.
• Windows Ready-
Drive - uses hybrid
drives as a hard-drive
caching solution.
Figure 26 - Intel Turbo Memory Console
M730T vista Concise UG.book Page 35 Thursday, September 25, 2008 1:14 PM