User Manual

BIOS Utilities
5 - 8 Advanced Menu
5
Advanced Menu
Installed O/S (Advanced Menu)
This setting tells the computer what kind of operating system you’re using. Make
sure you choose the correct setting for your O/S in order to prevent system problems.
Note: If you select the Vista O/S then the SATA Mode Selection menu will become
available. If you are installing the Windows XP O/S make sure you have set th e ap-
propriate operating system here in order to prevent system problems.
Figure 5 - 3
Advanced Menu

SATA Mode & eSata Port
You should select AHCI
mode in SATA Mode Se-
lection to support the e-
SATA port in Windows
Vista (hot-swapping is not
supported in Windows
XP).
Intel Turbo Memory
Select AHCI mode in Sata
Mode Selection if you
have included an Intel Tur-
bo Memory module in your
purchase configuration.
You should then enable
support for Intel Turbo
Memory from DFOROM
(Robson) Support (see
page 5 - 9).
Main AAdvanced Security Boot Exit
F1 He l p  Sel ect I t em -/+ Change Val ues F9 Set up Def aul t s
Es c Exi t  Sel ect Menu Ent er Sel ec t Sub- Menu F10 Sa ve and Exi t
ItemSpecific Help
Advanced
Sel ec t t he oper at i ng
systeminstalled
on your s ys t e m whi ch
you wi l l use mos t
commonl y.
Not e : An i n c o r r e c t
setti ng can cause
someoperating
systemstodisplay
unexpec t ed behavi or .
Phoenix SecureCore(tm) Setup Utility
Installed O/S: [VISTA]
SATA Mode Selection: [AHCI]
DFOROM (Robson) Support: [Enabled]
Legacy USB Support: [Enabled]
Boot-time Diagnostic Screen: [Disabled]
Legacy OS Boot: [Enabled]
Reset Configuration Data: [No]
Power On Boot Beep [Disabled]
Battery Low Alarm Beep [Enabled]
Fan Control: [Automatic]
Only available if Windows Vista
is selected as the O/S.