User Manual

Table Of Contents

Upgrading The Computer

6 - 4 Upgrading the Hard Disk Drive

Upgrading the Hard Disk Drive

The hard disk drive(s) can be taken out to accommodate other 2.5" serial (SATA)

hard disk drives with a hei ght of 9.5mm (h ) (see “Storage” on page C - 3). Follow

your operating system’s installation instructions, and install all necessary drivers

and utilities (as outlined in “Drivers & Utilities” on page 4 - 1), when setting up a

new hard disk.

1. Turn off the computer, and turn it over and remove the batt er y.

2. Locate the component bay cover and remove screws - .



HDD System Warning

New HDD’s are blank. Be-

fore you begin make sure:

You have backed up any

data you want to keep from

your old HDD.

You have all the CD-ROMs

and FDDs required to in-

stall your operating system

and programs.

If you have access to the in-

ternet, download the latest

application and hardware

driver updates for the oper-

ating system you plan to in-

stall. Copy these to a

removable medium.

Figure 6 - 2

Component Bay

Cover Screws

1 7