User Manual

Upgrading The Computer
Upgrading the System Memory (RAM) 6 - 11
6
Upgrading the System Memory (RAM)
Model A & B computers have one memory socket, and Model C computers have
two memory sockets, for 200 pin Small Outline Dual In-line (SO-DIMM) D DRIII
(DDR3) type memory modules (see “Memory” on page C - 2 for details of support-
ed module types).
1. Turn off the computer, and turn it over and remove the battery.
2. Locate the component bay cover and remove screws
- .

Fan Cable & Cover
Make sure you recon-
nect the fan cable
before screwing down
the bay cover. Note the
information on replacing
the RAM & CPU bay
cover in “Cover Pins”
on page 6 - 14.
Warning
Before working with the
internal componen ts you
will need to wear an anti-
static wrist strap to
ground yourself because
static electricity may
damage the compo-
nents.
Figure 6 - 7
Bottom Cover
Screws
5
1
4
1
3
2
4
1
3
2
4
Model A
Models B & C