Manual

Modules & Options
3.75G/HSPA Module 7 - 35
7
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see Table 1 - 6, on
page 1 - 18) to toggle power to the 3.75G/HSPA module.
When the 3.75G/HSPA
module is powered on, the indicator will briefly be displayed. Make sure you in-
stall the drivers in the order indicated in
Table 4 - 1, on page 4 - 3 . Note that exiting
the application does NOT turn off the 3.75G/HSPA module.
• BandLuxe HSDPA Utility - See “BandLuxe HSDPA Utility Installation” on
page 7 - 36 for driver installation information and “BandLuxe HSDPA - Con-
nection Manager” on page 7 - 37 for instructions on using the BandLuxe
HSDPA Utility.
• Wireless Manager - See “Wireless Manager Installation” on page 7 - 55 for
driver installation information and “Wireless Manager Application” on page 7
- 56 for instructions on using Wireless Manager.