Manual

Modules & Options
3.75G/HSPA Module 7 - 55
7
Wireless Manager
With the 3.75G/HSPA module and USIM card (supplied by your service provider)
installed you may then install the Wireless Manager application. The Wireless
Manager application allows you to directly access your HSPA internet service from
the computer.
Wireless Manager Installation
1. Enable power to the module by pressing the Fn + key combination (give
the module about 10 seconds to power on - the on screen icon will
indicate the module’s power status).
2. If a Found New Hardware window appears, click Cancel (click Cancel for
all Found New Hardware windows that appear).
3. Insert the Device Drivers & Utilities + User’s Manual disc into your exter-
nal optical device drive.
4. Click Option Drivers (button).
5. Click 4.Install 3G Driver > Yes.
6. Click Next > Next > Install.
7. Click Finish.
8. Access the Wireless Manager application from the Start menu or the desk-
top shortcut .

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + key com-
bination to toggle power to
the 3.75G/HSPA module,
and check the indicator to
see if the module is pow-
ered on or not (see Table 1
- 6, on page 1 - 18/ Table 1
- 3, on page 1 - 12).