Owner's manual

3.75G/HSPA Module D - 51
D
Before installing the application, make sure that the 3.75G/HSPA module is ON
(installing the driver with the module off will not allow the software to detect the
module hardware correctly). Use the Fn + key combination (see “Function/Hot
Key Indicators” on page D - 6) to toggle power to the 3.75G/HSPA module.
When
the
3.75G/HSPA module is powered on, the indicator will briefly be displayed.
Make sure you install the drivers in the order indicated in
Table D - 3, on page D - 33 .
Note that exiting the application does NOT turn off the 3.75G/HSPA module.
• HSPA Modem Interface - See “HSPA Modem Interface Installation” on
page D - 52 for driver installation information and “HSPA Modem Interface”
on page 7 - 25 for instructions on using the HSPA Modem Interface.
• Mobile Partner - See “Mobile Partner Application Installation” on page D -
53 for driver installation information and “Mobile Partner Application” on
page 7 - 34 for instructions on using the Mobile Partner application.

3.75G/HSPA
Modules & System
Wake Up
Note that the 3.75G mod-
ules
DO NOT support
system wake up on
3.75G/HSPA modem ac-
tivity.