User manual

Functions:
How to connect your Bluetooth Devices:
Chill Fidelity Bluetooth Speaker
English
www.chill-innovation.com
POWER TO THE PEOPLE
1. Never store the battery in a depleted state as the cells can be damaged.
2. Discharge & charge the battery at least once every 3 months to maintain its capacity.
3. Always keep the unit dry. Avoid damp conditions, corrosive materials & direct sunlight.
4. Do not clean with harsh chemicals, soaps or detergents.
Maintenance:
1. Turn the Bluetooth speaker on by sliding the Power button to the ON position
The Status LED will start blinking Blue & Red alternately and the speaker will search for a Host.
2. Turn on Bluetooth on your Smartphone / Host and search for new Bluetooth devices.
For iPhone/iPad: Go to Settings > General > Bluetooth (when enabled it will start searching)
3. Choose the Chill Fidelity speaker when it appears on your Bluetooth search list.
Please enter 0000 if a password is required on some devices.
4. When successfully connected the Status LED will blink blue. You are ready to Play!
The speaker will Auto Reconnect to a previously paired host, if available, when powered on.
Long press button until Red / Blue blinking & beep, to force the speaker to search for a new Bluetooth host
It is recommended to use a Bluetooth 4.0 compliant host device for higher audio quality and lower power consumption.
Status LED
Microphone
Vol- / Previous
Play / Pause / Talk
Power On/Off
Blue & Red blinking: Searching for a Bluetooth Host
Blue blinking: Paired with a Bluetooth Host
Green blinking: 3D DSP Sound Effect Enabled
Red blinking: Low battery (please start recharging)
Red light: Charging battery (will turn off when recharged)
Status LED
When the battery is running low, the Status LED will begin to blink Red.
Connect the USB charging cable to the USB Port and a suited USB Power Source.
The LED will light Red when charging, and turn off when the Speaker is fully charged.
A full charge takes 2-4 hours depending on source (5V/1A USB Adapter recommended)
NOTICE: Fully charge the battery before first time use (until Status LED turns off).
Charging the Battery:
1. Long press the & buttons to adjust the speaker volume.
2. Shortly press the & buttons to skip track (if supported in host/app)
3. Press the button to pause and/or resume music (if supported in host/app)
4. Press & simultaneously to enable/disable 3D Sound (Green LED when On)
Using Your Bluetooth Speaker:
If an audio source is connected via the 3.5mm Mini-Jack AUX Input , the Speaker will play from this source
instead of wireless Bluetooth (the speaker buttons will have no function)
Good to know:
Included:
Chill
Bluetooth
Speaker
3.5mm Mini-Jack
Audio Cable
Micro-USB
Charging Cable
User Manual
It takes up to 50 hours of
music playback for the
speakers to break-in for its
full sound potential.
Experiment with a Equalizer
(EQ) for your preferred sound.
Experiment with the Speaker
placement for better sound.
Corners and hard surfaces will
enhance bass response.
The 3D DSP Sound is also
suited for movies and gaming.
Enjoy your favorite music
and just Chill once in a while!
D E N M A R K
USB Port
AUX Input
Vol+ / Next
1. Press the button shortly to answer an incoming telephone call and to hang up.
2. Press the button long to decline an incoming telephone call.
3. Press the button fast twice to redial the last called number in the phone call log.
Using Your Hands-free Speakerphone:
PC
USB 5V 1A
AC Adapter
Charge from:
USB
PowerBank
Chill
Pouch
(Optional)
RoHS