User manual

Chill Innovation Wireless Bluetooth Micro Keyboard English User Manual
Version 1.4 6 / 23
5.1.5. Pairing
Click the PAIR/CONNECT key until the communication LED start blinking.
Follow the instructions on your host device for discovering new Bluetooth devices.
Once the pairing is successfully established, the yellow LED will turn OFF.
The keyboard should now be ready for use with your computer/host.
5.2. Charging the battery
The Keyboard comes with a built-in A-grade
Li-polymer battery. Please use only approved USB
cables and chargers.
Connect the Keyboard and computer (or
alternatively a USB charger (5V/1A max) with the
included USB cable to start charging the battery.
The red Battery Charging LED indicator (5) will turn
on when charging is in progress.
A full charge takes about 2-3 hours depending on the charger and will provide up to 720
hours of use.
A 10 minutes charge will provide approximately one day of use.
When charging is completed, the charging LED will turn off.
Please pull out the charging cable from computer or AC Power source, and then remove
the charger cable from keyboard afterwards.
When the battery capacity is getting low, the ‘Low Battery’ LED indicator (6) will start to
blink.
Never keep the battery in a depleted state as it will reduce lifetime significantly!
Fully cycle the battery at least once every 3 months if not used regularly.
Note:
Before using the keyboard for the first time, the battery must be fully charged!
Figure. 5