User manual

Chill Innovation Wireless Bluetooth Micro Keyboard English User Manual
Version 1.4 8 / 23
6.1.3. Configuration and Troubleshooting

After the software is successfully installed on your device, you need to pair the
Bluetooth Keyboard.

Make sure your Bluetooth keyboard is in PAIR/CONNECT mode (See 5.1.5)

On your host device, open Bluetooth Devices, and click “Add new”

After the Keyboard is discovered, select it, and then tap on “Next”

When prompt for a passcode, leave the field blank and tap “Next”
(if this fails, enter 0000 as a passcode and press Next)

At this step select the “Input device” service and tap “Finish”.

Go to the Software settings Panel, and tap “Connect”.
Here are a few solutions for the error messages that might appear in the software:

The software is not responding. You need to reinstall this software."
This error is caused by a problem with the communication between the software
components. You need to check if your Windows Mobile Device is compatible
with the software, and to try to reinstall the software.