User manual

Chill Innovation Wireless 2.4G RF Micro Keyboard English User Manual
Version 1.2 6 / 11
5.2. Charging the battery
The Keyboard comes with a built-in Hi-grade
Li-polymer battery. Please only use approved USB
cables and chargers.
Connect the Keyboard and computer with the
included USB cable to start charging the battery.
Alternatively use a USB charger (5V/1A max).
The red Battery Charging LED indicator (5) will turn
on when charging is in progress.
A full charge takes about 3-4 hours and will give up to one month standby.
A 10 minutes charge will provide approximately one day of use.
When charging is completed, the charging LED (5) will turn off.
Please pull out the charging cable from computer or AC Power source, and then remove
the charger cable form keyboard afterwards.
When the battery capacity is getting low, the ‘Low Battery’ LED indicator (6) will start to
blink.
Note:
Before using the keyboard for the first time, the battery must be fully charged!
Never store the battery in a depleted state. If not used regularly, it should at least
be discharged and charged again once every 3 months to avoid the battery cells
being damaged.
Figure. 5