User's Guide

Using the Baby Monitor

ENGLISH

• Press and hold the PAIR button on the underside of the Baby Unit until

PAIR OK appears on the

screen. The video from the camera will then appear.

NOTE

A camera can only be registered to one Parent Unit at any one time.

3. Using the Baby Monitor

3.1 SD card installation

As an option, the Unit provides video recording on up to 32GB microSD

card into the SD slot as shown.

3.2 Setting Up

Place the Baby Unit in a convenient location (e.g., on a table) and point

the camera lens towards the area you want to monitor.

image shown on the Parent Unit.

NOTE

Do not place the Baby Unit within the baby’s reach! If there is interference

with the picture or sound, try moving the units to different locations, and

ensure they are not close to other electrical equipment.

3.3 Night Vision Mode

in the dark. When the built-in photo sensor on the top of the Unit detects

screen on the Parent Unit will display in black and white. The icon will be

displayed at the top of the screen.

3.4 Privacy Protection

To enable privacy protection mode, slide the knob to position such that

the device will be disconnected from the Wi-Fi

network.

To disable the privacy protection mode, slide the knob to the

position

to restore the Wi-Fi

network connection.

Note: The privacy protection setting is disabled by default.