Use And Care Manual
www.tsicustomerservice.com
A552
5
FUNCTION
FLAME
ere are 6 brightness levels that can be selected.
Settings F6 - F4 decrease in Amber brightness
Settings F3 - F1 decrease in Spectrare brightness
e replace contains three infrared quartz heating elements.
e thermostat setting range is 62°F - 82°F or 17°C - 27°C or
continously ON.
e thermostat is adjustable by 2°F or 1°C increments.
e up and down buttons“ ”on the remote will increase /
decrase temperature setting.
To change between °F and °C press and hold the HEATER
button on the control panel for 3 seconds.
Pressing the timer button will cycle through the timer
settings; 30 minutes, 1 Hour, 2H, 3H, 4H, 5H, 6H, 7H, 8H,
9H and o (00).
HEATER
TIMER
ICON
DESCRIPTION
OPERATION INSTRUCTIONS
POWER
e power button supplies power to all of the functions
of the replace. e power button will put the insert in a
standby mode. is will turn o all functions at once but
will hold the settings in the memory. By pressing the
Power button again the unit will turn on at the same
settings.
With the power on press and hold the Power button on
the control panel for 10 seconds to disable or re-enable the
heater function. Once disable or re-enabled the emberbed
lights will ash multiple times.