User's Manual

ManualsBrandsChina Electronics Shenzhen ManualsAudio EquipmentBLUETOOTH SPEAKER

Product Specification:

Main parameter:

•Bluetooth version: V4.1

•output power：3W

•frequency response：150hz-18khz

•drive：2’

•power supply：USB, DC 5V 500mA

•distortion：≦1%

•S / N：≥ 75dB

•battery capacity：2000mAh/3.7V

•battery working time：3-5 hours (play as the max Volume)

•battery charging time：10 hours

•size：L152 *w65 * h75mm

•N.W.：390g

Packing Contents:

1、the quake blue-tooth speaker

2、user’s manual

3、USB charging cable

4、3.5mm stereo cable

Charging the Speaker:

Before using the speaker for the first time, charging it for at least 4 hours.

1、Plug the USB cable into the port on the speaker, plug the other end into the USB port on the adapter(DC 5V).

2、Red LED will turn on to indicate that the unit is charging.

3、Red LED will turn off when fully charged.

Start-up& Shutdown Functions:

1、Long press POWER to start the blue-tooth speaker.

2、Blue LED flashes, waiting for pairing

3、Long press POWER to shutdown the blue-tooth speaker.

4、LED off if shutdown the speaker.

Pairing the Device:

1、Place the speaker near the Blue-tooth-enabled device.

2、Long press POWER to start the blue-tooth speaker, blue LED flashes, the speaker is now in pairing mode.Follow the

instructions of your device to search for the speaker.

2、The speaker is called “Q8”, enter the PIN”0000” if need.

3、Blue LED light, the completion of the pairing, while the voice prompts. The speaker is in the state of pairing the last

device default in the first 3 seconds after starting. If failing to pair, the speaker will be in state of pairing automatically.

Summary of content (5 pages)

PAGE 1
Q8 Product Specification: Main parameter: •Bluetooth version: V4.1 •output power：3W •frequency response：150hz-18khz •drive：2’ •power supply：USB, DC 5V 500mA •distortion：≦1% •S / N：≥ 75dB •battery capacity：2000mAh/3.7V •battery working time：3-5 hours (play as the max Volume) •battery charging time：10 hours •size：L152 *w65 * h75mm •N.W.：390g Packing Contents: 1、the quake blue-tooth speaker 2、user’s manual 3、USB charging cable 4、3.
PAGE 2
LED Indicator 1、Charging: Red LED on 2、Fully charged: Red LED off 3、Pairing Mode: Blue LED flashes. 4、Connected: Blue LED slow flashes 5、Line IN Mode: Blue LED on 6、Low battry: Red LED flashes Safety and General Information: 1、Do not expose the device to water or attempt to disassemble the device. If the device is exposed to water or disassembled, the user may be risking an electronic short. 2、Do not use this products in an aircraft or in hospital.
PAGE 3
⑦ ⑧ ⑨ Functions: 1、 Power Long press POWER to start or off. 2、 VOL+ *Long press to skip to next track *Quick press to increase volume 3、Play/Pause, Phone answer, *When playing music, press the button to pause or play. *When you receive a call, press the button to answer. When the call ends, music will resume playing.
PAGE 4
5、LED Red/Blue 6、Microphone 7、Micro USB: Use a computer USB port/AC power adapter with USB 8、RESET 9、3.5mm audio input (line-in) FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
PAGE 5
accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be us ed in portable exposure condition without restriction.