User's Manual

Charging Your Speaker
Your speaker has a built-in, rechargeable lithium ion battery. To avoid damage, do not attempt to
remove the battery. The full performance of the battery is only achieved after a few charging-dis-
charging cycles. Charge the battery fully before first use. To do so, follow the steps below:
1. Connect the Micro USB end of the included 2 in 1 USB Charging and Audio Cable to the Micro
USB charging port on your speaker. Then plug the USB end of the cable into a USB port on your
computer or a suitable power adapter in order to charge the internal rechargeable battery.
NOTE: The internal battery of your speaker takes approximately two hours to charge when
completely drained.
2. When the battery is charging, the Charging Status LED indicator light will turn red. This light
will turn off when the battery is fully charged. Unplug when charging is complete.
NOTE: Overcharging could reduce the life of the battery. A charged battery will lose its capacity
if it is not used on a regular basis.
Important!
To avoid a complete discharge of the battery, charge your speaker at least once every six
months.
Micro USB
2 in 1 USB Charging and Audio Cable
Audio
USB