China Starwin Flat Panel Integrated Satellite Communication Terminal User Manual FL60P-E / FL60P-M / FL60F-M China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
Legal Rights © Copyright 2019 China Starwin Science & Technology Co., Ltd. All rights reserved. The material contained herein is proprietary, privileged, confidential and owned by China Starwin or its third party licensors. No disclosure thereof shall be made to third parties without the express written permission of China Starwin Science & Technology Co., Ltd. China Starwin Science & Technology Co., Ltd.
Disclaimer (a) THE PRODUCT IS SOLD ON AN "AS IS" BASIS. CHINA STARWIN, ITS AFFILIATES OR ITS LICENSORS MAKE NO WARRANTIES, WHATSOEVER, WHETHER EXPRESS OR IMPLIED, WITH RESPECT TO THE SOFTWARE AND THE ACCOMPANYING DOCUMENTATION. CHINA STARWIN SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT WITH RESPECT TO THE SOFTWARE.
OR OTHERWISE AND WHETHER BASED ON THIS AGREEMENT OR OTHERWISE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Safety Considerations For the following safety considerations, "Instrument" means the ‘satellite terminal Flat Terminal’ units, components and their cables. It is necessary to read the instructions carefully before using the satellite terminal flat portable terminal. The terminal usage shall be carried out in accordance with the described steps and methods to ensure the safety and accuracy of equipment operation. Radio The instrument transmits radio energy during normal operation.
Information in this document is subject to change without prior notice. Corporate and individual names and data used in examples herein are fictitious, unless otherwise noted. China Starwin Science & Technology Co., Ltd. reserves the right to alter the equipment specifications and descriptions in this publication without prior notice. No part of this publication shall be deemed to be part of any contract or warranty unless specifically incorporated by reference into such contract or warranty.
DANGER: Indicates a potentially hazardous situation which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury. NOTICE: It is used for advisory messages concerning possible property damage, product damage or malfunction, data loss, or other unwanted results – but not personal injury. Indicates a safety message that concerns a potential electric shock hazard.
Contents 1 Introducing the Flat Panel Integrated Satellite Communication Portable Terminal ............. 9 2 Technical Specification ....................................................................................................... 11 3 Packing List ........................................................................................................................ 12 3.1 Automatic Terminal (FL60P-E) Packing List .......................................................... 12 3.
5.6 Terminal Stowing ..................................................................................................... 46 5.6.1 Automatic Terminal (FL60P-E) Stowing....................................................... 46 5.6.2 Manual Terminal (FL60P-M) Stowing .......................................................... 50 6 Troubleshooting and Maintenance ...................................................................................... 52 6.1 Troubleshooting .......................................
1 Introducing the Flat Panel Integrated Satellite Communication Portable Terminal The Flat Panel Integrated Satellite Communication Portable Terminal uses an advanced and ultra-modern high-gain flat array antenna system. This is a completely new and novel antenna system designed and produced for a new generation of flat- type integrated satellite communication terminals.
Figure 1-2 Manual satellite communication terminal (FL60P-M) Figure 1-3 Fixed satellite communication terminal (FL60P-M) China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
2 Technical Specification Item Model No.
3 Packing List 3.1 Automatic Terminal (FL60P-E) Packing List Basic configuration of the satellite terminal: Slotted waveguide array flat-panel terminal (equivalent to 0.6m Ku-band parabolic antenna) Satellite modem module BUC module LNB module GNSS module Display module Satellite search module Wireless router Power supply module Protective casing / Support platform Unlike standard VSAT systems the above elements are integrated inside the satellite terminal.
3.2 3.2 Manual Terminal (FL60P-M) Packing List Basic configuration of the satellite terminal: Slotted waveguide array flat-panel antenna (equivalent to 0.6m Ku-band parabolic antenna) Satellite modem module BUC module LNB module GNSS module Display module Satellite search module Wireless router Power supply module Protective casing / Support platform Unlike standard VSAT systems the above elements are integrated inside the satellite terminal.
3.3 Fixed Terminal (FL60F-M) Packing List Basic configuration of the satellite terminal: Slotted waveguide array flat-panel antenna (equivalent to 0.6m Ku-band parabolic antenna) Satellite modem module BUC module LNB module GNSS module Display module Satellite search module Wireless router Power supply module Protective casing / Support platform Unlike standard VSAT systems the above elements are integrated inside the satellite terminal.
Power Cable -10m 05 1 Standard 3.4 Unpacking and Inspection When you receive the system containers, unpack and inspect the components and hardware to ensure that all parts have been received in good condition. 3.5 Freight Damage If any parts appear to have been damaged in transit, immediately contact the freight carrier. 3.6 Material-Missing or Damaged If any parts appear to be missing or damaged, but not as a result of handling in transit, contact your dealer or distributor.
4 Description of satellite terminal 4.1 Terminal Structure Diagram 4.1.1 Automatic Satellite Communication Terminal (FL60P-E) Figure 4-1 Figure 4-2 1- Support leg; 2- Protective casing / Support platform; 3- Support mechanism; 4- Motors cover; 5- Handle; 6- Antenna casing lock; 7- OLED Display; 8- Self-lock button; 9- Power ON/OFF button, 10- Compass China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
4.1.2 Manual Satellite Communication Terminal (FL60P-M) Figure 4-3 Figure 4-4 1- Support leg; 2- Protective casing / Support platform; 3- Support mechanism; 4- Elevation angle adjustment knob; 5- Elevation angle scale; 6- Handle; 7- Antenna casing lock; 8- OLED Display; 9- Polarization scale; 10- Polarization adjustment knob; 11- Azimuth adjustment knob; 12- Azimuth scale; 13- Self-lock button; 14- Power ON/OFF button, 15- Compass China Starwin Science & Technology Co., Ltd.
4.1.3 Manual Satellite Communication Terminal (FL60F-M) Wall Mount: Installation diagram of the wall mounting type China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
Pole Mount: Installation diagram of the steel hoops type China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
Mount Bracket: Installation diagram of the bracket The position of installation hole The hoops type installation: The external diameter of pole 3.5-5.5’’ (89-140mm), wall thickness ≧2mm. China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
4.2 Terminal Dimensions 4.2.1 Automatic Satellite Communication Terminal (FL60P-E) The dimension drawing of the satellite terminal Flat Terminal (Unit: mm) 4.2.2 Manual Satellite Communication Terminal (FL60P-M) The dimension drawing of the satellite terminal Flat Terminal (Unit: mm) China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
4.2.3 Fixed Satellite Communication Terminal (FL60F-M) The dimension drawing of the satellite terminal Fixed Flat Terminal (Unit: mm) 4.3 Terminal Wireless Access Details 4.3.1 Automatic Terminal (FL60P-E) Wireless Access Details Device Serial Number (S/N): PE201712XXX (XXXX is the number of the following equipment) Wi-Fi Router: SSID: HILINK-XXX 60PE-XXX Default IP Address: 192.168.16.254 User: admin Default Password: admin Modem (iDirect-x7): S/N: M012R44 Default IP Address: 192.168.0.
User: admin Default Password: iDirect Bluetooth: Device Name: FINDERXXXX PIN: 1234 Polarization: Tx(H); Rx(V) 4.3.3 Fixed Terminal (FL60F-M) Wireless Access Details Device Serial Number (S/N): PE201712XXX (XXXX is the number of the following equipment) Wi-Fi Router: SSID: HILINK-XXX 60PE-XXX Default IP Address: 192.168.16.254 User: admin Default Password: admin Modem (iDirect-x7): S/N: M012R44 Default IP Address: 192.168.0.
5 Terminal Installation, Initialization and Alignment 5.1 Terminal Installation 5.1.1 Automatic Terminal (FL60P-E) Installation 1. Take the terminal out of the backpack and open four support legs, as shown in Figure 5-11-1 (below). Figure 5-1-1-1 2. Place the terminal safely on the ground in a horizontal position.
• Do not work in high wind or rain; or if a storm, lightning, or other adverse weather conditions are either present or approaching. DANGER Do not connect the other side of the power cable to the power source until the terminal installation completion. 3. Take the power cable and connect it to the terminal’s power socket (POWER), as shown in Figure 5-1-1-2 below. (Or 24V + 5% DC, according to configuration for selection) DANGER The standard requirements to Power Source are 100-240VAC 50/60Hz.
Figure 5-1-3 Deploying 5. Point the terminal, roughly, in the required direction using the built-in compass (Figure 5-11-4). NOTICE Direction to the satellite must be clean from obstacles during the terminal operation. 6. Using the air-bubble, ‘spirit-level’, built into the compass adjust the support legs to make the terminal horizontal. (Figure 5-1-1-4). Figure 5-1-1-4 Compass China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
5.1.2 Fixed Terminal (FL60F-M) Installation 1. Firstly, the bracket is fixed on the antenna body, and the screw is not fastened, as shown in Figure 5-1-2-1 (below). Figure 5-1-2-1 Bracket fixed of antenna body 2. The bracket is fixed on the wall by the expansion screw, as shown in Figure 5-1-2-2. Figure 5-1-2-2 Schematic diagram of expansion screw fixation DANGER Do not connect the other side of the power cable to the power source until the terminal installation completion.
Figure 5-1-2-3 Interface of power supply NOTICE Direction to the satellite must be clean from obstacles during the terminal operation. 5.2 Terminal Initialization 1. Connect the Power cable to the Power Source. Upon connection, to the power source, the display will show the company logo (Figure 5-2-1). Figure 5-2-1 Logo DANGER The standard requirements to Power Source are 100-240VAC 50/60Hz. (Or 24V + 5% DC, according to configuration for selection) 3. Press the “POWER ON/OFF” button.
Indication General LNB Power Power Supply Supply is in Indicator flashes is in process process of of detection detection Indication General Power LNB Power Indicator lights Supply is Supply is continuously detected detected BUC Power GNSS signal Attitude is in Supply is in is in process process of process of of detection detection detection BUC Power GNSS signal Supply is is acquired detected Attitude is detected Table 5-2-1 Display instructions Figure 5-2-2 Detection process 3.
NOTICE The ‘App’ for Terminal Control should also be used if it is necessary to select a different satellite. Please see the operational instructions in section-5.5. Figure 5-2-5 Satellite name Figure 5-2-6 Satellite parameter 5. When the system is ready for alignment, to the satellite, the following display is shown, Figure 5-2-7. Figure 5-2-7 Ready to point to the satellite 6. Waiting for ACU to connect to Modem correctly, the following display is shown, Figure 5-2-8.
5.3 Terminal Antenna Alignment 5.3.1 Automatic Terminal (FL60P-E) Alignment 1. The display indications for antenna adjustment are described in Table 5-3-1-1. The following abbreviations are used: EL – Elevation (Up and Down), AZ – Azimuth (Left and Right), POL – Polarization (Clockwise and Counter Clockwise). EL UP DOWN AZ LEFT RIGHT POL CW CCW Table 5-3-1-1 2. When EL is displayed for the first time an automatic, coarse adjustment of antenna’s Elevation angle is performed (Figure 5-3-1-1).
Figure 5-3-1-3: Polarization adjustment display 5. The coarse adjustment of the Polarization angle is completed when the indication, shown in Figure 5-3-1-4, is displayed. Figure 5-3-1-4: Polarization angle coarse adjustment is completed 6. When AZ is displayed for the first time the automatic, coarse adjustment of antenna’s Azimuth is performed (Figures 5-3-1-5). The current Beacon receiver signal-quality (SQ) and the maximum available signal quality (MAX) are represented on the right side of the display.
9. The Elevation angle ‘fine-tune’ is completed when the indication, shown in Figure 5-3-1-8, is displayed. Figure 5-3-1-8: Elevation angle fine-tune is completed 10. When POL is displayed for the second time the antenna perform an automatic fine-tune of the Polarization. The current Beacon receiver signal quality (SQ) and the maximum available signal quality (MAX) are represented, on the right side of the display. Figure 5-3-1-9: Polarization angle fine-tune 11.
13. Within a further 3 seconds the antenna alignment message, shown in Figure 5-3-1-12 is displayed. Figure 5-3-1-12: Alignment full completion message Figure 5-3-1-13: Signal quality display 14. LED state: OLED normal display, the LED flashing frequency is 1 second, two flashes at one time; OLED Hibernation mode, the LED flashing frequency is 3 second, two flashes at one time; Press the touch key, LED flash fast, when the OLED enter the Hibernation mode, can make the screen light up. 5.3.
2. The adjustment of antenna elevation angle, by slow rotation of corresponding adjustment knob, according to the arrow direction, and refer to the display instructions. (Figure 5-3-22). Figure 5-3-2-2 Elevation angle adjustment knob 3. The adjustment of antenna polarization angle, by slow rotation of corresponding adjustment knob, according to the arrow direction, and refer to the display instructions. (Figure 5-3-23). Figure 5-3-2-3Polarization adjustment knob 4.
Figure 5-3-2-4 Azimuth adjustment knob 5. The antenna alignment message is displayed, as shown in Figure 5-3-2-5, that means that the process of satellite alignment has been completed. When modem indicates that the network is successful, the network can be used. If necessary, according to the signal quality shown in figure. 5-3-2-6, the elevation, azimuth and polarization handwheel can be adjusted manually to find better signal value.
5.3.3 Fixed Terminal (FL60F-M) Alignment 1. According to the direction of the satellite, adjust the elevation, polarization and azimuth of the terminal for point to the satellite. In the process of adjustment, you can refer to the prompt information as shown in Figure 5-3-3-1. Figure 5-3-3-1 The prompt information of pointing NOTICE Slowly rotate adjustment knobs during the antenna pointing. 2. Adjust the direction of the azimuth, reference display indicator as shown in figure 5-3-3-2.
Figure 5-3-3-3 Elevation adjustment diagram 4. Adjust the direction of the polarization, reference display indicator as shown in figure 5-33-4. Figure 5-3-3-4 Polarization adjustment diagram 5. The screen as shown in Figure 5-3-3-5, it shows the pointing is completed, after waiting for modem to indicate that the network is successful, you can use the network.
Figure 5-3-3-6 Signal quality display 6. If it is used for the first time, please read the details in section-5.5 Application for Terminal Control and set up the satellite related parameters. 7. If the use is finished, press “POWER ON/OFF” again, unplug the power cable and RJ45 network cable. 8.
Indication PWS Tx The modem Powering Status is NOT COMPLETED The modem Indicator Powering Status is lights continuously COMPLETED Indicator flashes Rx The modem The modem TX Status is RX Status is OFF NOT LOCKED The modem The modem TX Status is RX Status is ON LOCKED STS The modem The modem LINK Status is NET Status is CONNECTING CONNECTING The modem The modem LINK Status is NET Status is CONNECTED CONNECTED Table 5-4-1 Modem status display 3.
Figure 5-5-1 2. Figure 5-5-2 Figure 5-5-3 The APP prompts you for a username and password. User Name: admin Password: starwin If necessary, please check "Save Password", as shown in Figure 5-5-2. Figure 5-5-4 Figure 5-5-5 Figure 5-5-6 China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
3. If you have already turned on Bluetooth, please jump to the fourth step; If you do not turn on Bluetooth, please click "TURN ON BLUETOOTH" and allow APP to open Bluetooth, as shown in Figures 5-5-3 and 5-5-4. 4. Click on the refresh icon behind the title "Available device".
Figure 5-5-9 Figure 5-5-10 Figure 5-5-11 5. After the authorization is successful, select the device that needs to be connected in the list and click "NEXT", as shown in Figure 5-5-11. 6. Selecting the work mode, the device will be fed back to APP according to the mode that it can support. APP provides the mode of choice, as shown in Figure 5-5-11. Select which mode you want to work, such as MODEM, and then enter the main interface, as shown in Figure 7-12.
7. The main interface is divided into two main functions. Device information: The current parameter configuration of the device, the display of device attitude, as well as the real time and maximum values of the signal quality obtained under the current mode, as shown in Figure 5-5-14.
the newly added satellite and it will appear in the satellite selection list, as shown in Figure 5-5-21. Figure 5-5-18 Figure 5-5-21 Figure 5-5-19 Figure 5-5-22 Figure 5-5-20 Figure 5-5-23 China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
5.6 Terminal Stowing Note: Only Manual and Automatic satellite communication terminals have stowing function, while fixed satellite communication terminals have no receiving function. 5.6.1 Automatic Terminal (FL60P-E) Stowing 1. Press the “POWER ON/OFF” button and verify that the display screen has changed to the company logo, as shown in Figure 5-6-1. Figure 5-6-1-1.
Figure 5-6-1-3: Self-lock button and folding down the antenna 3. Disconnect the power cable from power supply. 4. Disconnect the power cable from terminal power socket (POWER). 5. Disconnect the network cable. 6. Close support legs underneath the protective casing. 7. Put away the terminal and cables into the backpack. Terminal Stowing in the case of a power failure: 1.
position can be found by referencing the Azimuth scale, as shown in Figures 5-6-1-5. Figure 5-6-1-5: Position of the Azimuth adjustment knob 4. Return the Polarization to the zero position by turning the corresponding adjustment knob. The zero position can be found by referencing the Polarization scale, as shown in Figure 56-1-6. Figure 5-6-1-6: Polarization adjustment knob position 5. Return the Elevation to the zero position by turning the corresponding adjustment knob.
Figure 5-6-1-7: Elevation adjustment knob position 6. While holding the Antenna handle with one hand and pressing/releasing the self-lock button with the other hand, fold down the antenna into its Protective casing, as shown in Figure 5-6-1-8, until there is an audible click of the Antenna casing-lock. Figure 5-6-1-8: Self-lock button for folding down the antenna 7. Re-install the motors’ cover, to its original position. 8. Disconnect the power cable from terminal power socket (POWER). 9.
5.6.2 Manual Terminal (FL60P-M) Stowing 1. Press the “POWER ON/OFF” button and verify that the display screen has changed to the company logo, as shown in Figure 5-6-2-1. Figure 5-6-2-1 Logo 2. Disconnect the power cable from power supply. 3. Return the Antenna Azimuth to zero position by using the corresponding adjustment knob, while referencing the Azimuth scale, as shown in Figure 5-6-2-2. Figure 5-6-2-2 Azimuth adjustment knob and Azimuth scale 4.
5. Return the Antenna Elevation to zero position by using the corresponding adjustment knob, as shown in Figure 5-6-2-4, while referencing the Elevation scale. Figure 5-6-2-4 Elevation adjustment knob 6. While holding the Antenna handle with one hand and pressing/releasing the self-lock button with the other hand, fold down the antenna into its Protective casing, as shown in Figure 5-6-2-5, until there is an audible click of the Antenna casing-lock.
6 Troubleshooting and Maintenance 6.
7 Technical Service Contact Information China Starwin Science & Technology Co., Ltd Phone: +86 29 88664381 E-Mail: tech@starwincom.com Web: http://www.chinastarwin.com Address: Floor 17th, Hengtian Smart Fortune Building, No. 2 Daqing Road, Lianhu District, Xi'an 710082, China China Starwin Science & Technology Co., Ltd. Tel: +8629-88664381, E-mail: sales@starwincom.com, http://www.starwincom.
Appendix Grease Model Currently, the terminal adopts the Great Wall 7014-1 type high temperature grease, which is made by thickening synthetic oil with organic thickener and adding various additives such as oxygen resistance and corrosion resistance. The typical specifications: Item Appearance 1/4 Worked Penetration Consistency, 0.
