User's Manual
Table Of Contents
- 1._The_Summary_of_uSat_Flat_Portable_Ter
- 2._Technical_Specification
- OLE_LINK5
- OLE_LINK4
- 3._Packing_List
- 4._The_Description_of_uSat_Flat_Portable
- 4.1_Structure_Diagram
- 4.2_Device_Details
- 5._Operation_steps
- 5.1_APP_User_Manual
- 5.3_Collection_Steps
- OLE_LINK1
- 5.4_Matters_Needing_Attention
- 6._Simple_Fault_and_Maintenance
- 6.1_Troubleshooting
- 6.2_Maintenance
- 7._After-Sales_Service
China Starwin Science & Technology Co., Ltd.
Tel: +8629-88664381, E-mail:
sales@starwincom.com, http://www.starwincom.com
Copyright © 2019 China Starwin
• Do not work in high wind or rain; or if a storm, lightning, or other adverse weather
conditions are either present or approaching.
DANGER
Do not connect the other side of the power cable to the power source until the terminal
installation completion.
3. Take the power cable and connect it to the terminal’s power socket (POWER), as shown in
Figure 5-1-1-2 below. (Or 24V + 5% DC, according to configuration for selection)
DANGER
The standard requirements to Power Source are 100-240VAC 50/60Hz. (Or 24V + 5%
DC, according to configuration for selection)
Figure 5-1-1-2 Power socket
4. Keep the protective casing stable by holding with one hand while pulling up the antenna,
using the handle, with the other hand. Pull up until you hear the click of the elevation self-
lock mechanism, which indicates the correct antenna deployment, as shown in Figures 5-1-
3.