User's Manual

China Starwin Science & Technology Co., Ltd.
Tel: [phone], E-mail:
[e-mail], http://www.starwincom.com
Copyright © 2019 China Starwin
Indication
Indicator flashes
General
Power Supply
is in process
of detection
LNB Power
Supply is in
process of
detection
BUC Power
Supply is in
process of
detection
GNSS signal
is in process
of detection
Attitude is in
process of
detection
Indication
Indicator lights
continuously
General Power
Supply is
detected
LNB Power
Supply is
detected
BUC Power
Supply is
detected
GNSS signal
is acquired
Attitude is
detected
Table 5-2-1 Display instructions
Figure 5-2-2 Detection process
3. The GNSS signal acquisition process is displayed, as shown in figures 5-2-3 and 5-2-4.
(Lng = Longitude, Lat = Latitude).
Figure 5-2-3: GNSS signals acquisition success
Figure 5-2-4: GNSS signals acquisition failure
4. Information on currently selected satellite (including the satellite name, satellite beacon
frequency, beacon channel symbol rate and LNB Local Oscillator frequency) will be
displayed - as shown in figures 5-2-5 and 5-2-6.
NOTICE
When the Terminal is used for the initial time, the ‘App’ for Terminal Control should be
used first, to set up the satellite related parameters. If the Terminal has the polarization
switch function, please use the App to switch the polarization mode. Please see the
operational instructions in section-5.5.