User's Manual

China Starwin Science & Technology Co., Ltd.
Tel: [phone], E-mail:
[e-mail], http://www.starwincom.com
Copyright © 2019 China Starwin
Figure 5-3-1-3: Polarization adjustment display
5. The coarse adjustment of the Polarization angle is completed when the indication, shown in
Figure 5-3-1-4, is displayed.
Figure 5-3-1-4: Polarization angle coarse adjustment is completed
6. When AZ is displayed for the first time the automatic, coarse adjustment of antenna’s
Azimuth is performed (Figures 5-3-1-5). The current Beacon receiver signal-quality (SQ)
and the maximum available signal quality (MAX) are represented on the right side of the
display.
Figure 5-3-1-5: Azimuth adjustment display
7. The coarse adjustment of the Azimuth is completed when the indication, shown in Figure
5-3-1-6, is displayed.
Figure 5-3-1-6: Azimuth adjustment is completed
8. When EL is displayed for the second time the antenna performs an automatic fine-tune of
the Elevation angle. The current Beacon receiver signal quality (SQ) and the maximum
available signal quality (MAX) are represented, on the right side of the display.
Figure 5-3-1-7: Elevation angle fine-tune