User's Manual
Table Of Contents
- 1._The_Summary_of_uSat_Flat_Portable_Ter
- 2._Technical_Specification
- OLE_LINK5
- OLE_LINK4
- 3._Packing_List
- 4._The_Description_of_uSat_Flat_Portable
- 4.1_Structure_Diagram
- 4.2_Device_Details
- 5._Operation_steps
- 5.1_APP_User_Manual
- 5.3_Collection_Steps
- OLE_LINK1
- 5.4_Matters_Needing_Attention
- 6._Simple_Fault_and_Maintenance
- 6.1_Troubleshooting
- 6.2_Maintenance
- 7._After-Sales_Service
China Starwin Science & Technology Co., Ltd.
Tel: +8629-88664381, E-mail:
sales@starwincom.com, http://www.starwincom.com
Copyright © 2019 China Starwin
Figure 5-3-3-6 Signal quality display
6. If it is used for the first time, please read the details in section-5.5 Application for
Terminal Control and set up the satellite related parameters.
7. If the use is finished, press “POWER ON/OFF” again, unplug the power cable and RJ45
network cable.
8. LED state:
OLED normal display, the LED flashing frequency is 1 second, two flashes at one time;
OLED Hibernation mode, the LED flashing frequency is 3 second, two flashes at one time;
Press the touch key, LED flash fast, when the OLED enter the Hibernation mode, can make
the screen light up.
5.4 Modem Status Indication
1. The Modem Status indication is shown in Figure 5-4-1.
POWER
TX
RX
STATUS
NET
Ready: Not Ready:
Figure 5-4-1 Modem status indicator icon
2. The Modem status indication is shown in table 5-4-1.
Figure 5-4-2 Modem status