User's Manual

China Starwin Science & Technology Co., Ltd.
Tel: [phone], E-mail:
[e-mail], http://www.starwincom.com
Copyright © 2019 China Starwin
3. If you have already turned on Bluetooth, please jump to the fourth step;
If you do not turn on Bluetooth, please click "TURN ON BLUETOOTH" and allow APP
to open Bluetooth, as shown in Figures 5-5-3 and 5-5-4.
4. Click on the refresh icon behind the title "Available device". Search for new
Bluetooth devices (satellite terminalxxxx, xxxx is numbers), then click the Bluetooth
device name you want to connect, at this point, the APP needs to be authorized by the
Terminal, as shown in Figure 5-5-6, when the terminal receives the request information
of Bluetooth, the OLED display of the terminal will prompt the information shown in
Figure 5-5-7, and the buzzer will make a sound prompt at a frequency of 1 second. It
needs to be authorized by clicking the touch button on the OLED display screen of the
terminal (as shown in Figure 5-5-8), allowing the connection of the mobile phone APP,
and the APP will prompt "The connection is successful", as shown in Figure 5-5-9.
Figure 5-5-7
Figure 5-5-8 The touch button on OLED display screen
If the touch button does not click during the timeout (30 seconds), the authorization fails.
APP will prompt "The connection is failed, please click retry", as shown in Figure 5-5-10.
NOTICE
This operation only needs to be done when APP connects to a terminal first time or
reconnects a new terminal.