Specifications

(1) Slide the Main Switch to the "POWER" (Manual Power Zooming) position. The Auto Programmed Zoom
Composing symbol mark will disappear from the LCD panel (Fig. 23).
(2) Pressing the Manual Power Zoom Buttons (Tele or Wide) located on the bottom of the camera will change the
zoom range (Fig. 24).
(3) Select the ideal composition by pressing the Manual Power Zoom Button while looking at the subject through
the viewfinder.
(4) Press the Shutter Release Button completely to take the photograph.
NOTE: When the camera is not in use, the Main Switch should be turned to the "OFF" position in order to protect
the lens system from accidental damage. Never push or twist the lens barrel as this may cause damage to the zoom
lens. The zoom system will not function while the shutter release button is depressed.
AUTOMATIC FILM REWINDING
(1) When the roll of film is completed, a delay of from two to three seconds will occur before the
camera automatically starts rewinding the film. During the rewinding, the frame counter on the LCD panel will
count backwards.
(2) When the rewinding is completed, the motor will stop automatically and the frame counter on the LCD panel
will read "E" (Fig. 25).