Specifications

UNLOADING EXPOSED FILM

When the film in the camera is fully exposed, the film advance lever will stop. Do not attempt to force the lever any further, but rewind the

film and replace with a new one. Push in the rewind lock release button at the bottom of the camera (Fig. 30). Unfold the rewind crank of

the rewind knob (Fig. 31).

Turn the rewind crank clockwise. You will feel friction as the film is rewound. Suddenly, when the film is rewound completely, the friction

decreases and the rewind crank will turn with ease. Then pull out the rewind knob to open the camera back (Fig. 32). When the camera

back is opened, the frame counter will automatically reset to "S". The rewind lock release button on the bottom of the camera will pop out

upon the next advancement of the film advance lever. Your exposed film should be processed without delay.