Certificates

This Verification is for the exclusive use of Intertek's client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms
and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this
Verification. Only the Client is authorized to permit copying or distribution of this Verification. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material,
product or service must first be approved in writing by Intertek. The observations and test/inspection results referenced in this Verification are relevant only to the sample tested/inspected. This
Verification by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program.
Intertek Page 1 of 1 GFT-OP-11b (22-August-2019)
Test Verification of Conformity
Verification Number: 200500325SHA-V1
Applicant Name & Address:
Zhejiang Chint Electrics Co., Ltd.
No.1,Chint Road, Chint Industrial Zone, North Baixiang, Yueqing, Zhejiang
Province, P.R.China. 325603
Manufacturing site
Name&Address:
Same as applicant
Product Description:
Residual current operated circuit-breakers with integral overcurrent
protection for household and similar uses (RCBO’s)
Ratings & Principle
Characteristics:
U
n
= 220, 230, 240V~(1P+N), 50/60Hz
I
n
= 1, 2, 3, 4, 6, 10, 13, 16, 20, 25A, B- & C-type
I
∆n
= 0,03A, type-A
I
cn
= I
cs
= 6000A
Models/Type References:
Brand Name(s):
NB1L
Standard(s)/Directive(s):
EN 61009-1:2012 + A1:2014 + A2:2014 + A11:2015 + A12:2016
EN 61009-2-1:1994+A11:1998
Low Voltage Directive 2014/35/EU
Verification Issuing Office
Name & Address:
Intertek Testing Services Shanghai
Building No.86, 1198 Qinzhou Road (North), Shanghai 200233, China
Date of tests
2020-05-08 to 2020-06-30
Test Report Number(s):
200500325SHA-001
Signature
Name: Oliver Wei
Position: Manager
Date: 07 July 2020
On the basis of the referenced test report(s), sample(s) tested of the below product have been found to comply with
the standards harmonized with the directives listed on this verification at the time the tests were carried out. Other
standards and Directives may be relevant to the product. This verification is part of the full test report(s) and should
be read in conjunction with it <them>.
Once compliance with all product relevant mark directives are verified, including any relevant e.g. risk
assessment and production control, the manufacturer may indicate compliance by signing a Declaration of
Conformity themselves and applying the mark to products identical to the tested sample(s).