Specifications

11
Introduction to ChipPC ThinX OS
Ref: DL128B-1.0
Chip PC Technologies
www.chippc.com
1.2 Creating an ICA Connection to a Published Application
To create an ICA connection to a Published Application, perform the following:
1. Select Connection View from the ICA client View menu. The Connections menu will
appear on the left side of the menu bar.
2. Click to open the Connections menu.
3. From the Connections menu, select New… to open the Properties window.
4. In the Properties window, select the Network settings from the top left drop down list.
5. In the Network settings window, in the Server Location section, un-select the Use
Default check box.
6. In the Use Default field (currently set to not use the default), type the NetBIOS name
(Host name) or IP address of the server that the client will connect to.
7. In the next section, select the Published Application check box.
8. Click the browse button ( ) to open the Connection Selection window.
9. From the list of Published Applications in the Connection Selection window, select
the desired application.
10. The selected application name will automatically appear in the Description and
Destination fields.
11. Click OK to complete the creation of the ICA connection to a published application.
.
Figure 8 – ICA Connection Properties: Connection to a Published Application