Specifications

25
Introduction to ChipPC ThinX OS
Ref: DL128B-1.0
Chip PC Technologies
www.chippc.com
4 DHCP
When using the DHCP protocol to obtain information about the Xcalibur Global server, this
interface can be used for the following tasks:
Configuring the method used to retrieve the information from the DHCP server.
Display information obtained from the DHCP server.
5 SNMP
This interface is used to configure the device SNMP setting. These settings will affect the
ability of Xcalibur Global to locate this device using the SNMP protocol
6 Protocol Param
Use this interface to fine tune the Xcalibur Protocol.